That`s about what I expected of the Flex. I just don`t see the need for anything other than a quality rotary and a PC. You can get both of those for the price of 1 flex, and have *way* more uses/correctibility.
That`s about what I expected of the Flex. I just don`t see the need for anything other than a quality rotary and a PC. You can get both of those for the price of 1 flex, and have *way* more uses/correctibility.
Originally Posted by joyriiide1113
And that`s why the rotary is a must have. :2thumbs:
I own a PC and a rotary . When the flex came out I try to get it but it was backorder so I got a Makita BO6040 from Amazon for
1 Makita BO6040 6.6 Amp 6-In... $249.99
I have not used my PC since . According to the specs on the Flex the Makita have more forced rotation . It is a very well build tool and very close to a rotary in power to correct .
But as good as the BO6040 is it is not a rotary . The rotary and the Makita pull about the same .
Cheers , Jean Paul
Yeah maaan. The blue P2 is my second favorite finishing pad...very very little difference between the two, but even though the green is alittle firmer, I tested these pads on a black Phaeton I used to detail (miserabely difficult/finicky paint), and I was able to finish down a little better with the green over the blue...so I ordered about 25 of them before they stopped making them. Of course, the eventually break in and become less and less firm, so I have infinite options regarding the stiffness of the pad I want.
And I`m in further agreement regarding the 1-step polish...great results can be achieved via rotary and a 1-step polish (of course it`s not usually going to remove all the defects), but you`re still going to be able to remove twice the defects given the same amount of time...I`ll use a soft green or blue pad for dark finishes and a firm white pad with lots of pressure on lighter colors.
Originally Posted by maesal
They need to take the Flex and make a pure rotary equivalent (if they don`t already), as for me, it has the perfect handle, dial placement, and overall ergonomics. Like the Metabo, only better dial placement (for me).
They do. It`s the Flex LK603 VVB. It has a 10 AMP motor, 1K-3K RPM, and weighs 7.5 lbs.
There`s also the FLEX 3403
Triple Honda Owner
I find it interesting that everyone bashes the PC now however 3 years ago, that`s all there was on the RO side. Granted new technology may have come out with something better but saying, "Oh, it`s only good for waxes and things, if that" is just ironic to me.
My hands bead more than most cars...and I`d have it no other way.
Originally Posted by dawiyo
I still only use my UDM on my ultra soft clearcoat, it does a great job. The Flex, I use it on the other cars that have medium to hard cc.
I`m not trying to stir the pot, but it is possible to get a 1 step polish removing majority of defects with the Flex 3401 as shown in the below before and after. This was done with an orange Erasure pad, IP, and running the 3401 on a speed 6.
Before:
After:
I`ve posted these shots before on my original Flex review thread, but thought I`d dig them up again for some of the newer Flex owners and those considering purchasing one. both shots were full sun shots. As you can see the paint on this `04 Acura MDX was destroyed. It was pretty much like that all over the car. The after pic was taken after correction and application of Menzerna FMJ. Also, it should be noted that it was about 2 days after I detailed it, so there is some dust and light dirt on it, but I think you get the idea. BTW, here is the finished product:
Granted, I believe that Acura paint is probably more on the softer side, but this is still a testament to what the 3401 can do. Just thought I`d throw my $.02.
Club FLEX X 2
Originally Posted by dawiyo
No one is bashing the pc or the udm. The Flex is just so much better. However that should not take anything away from the 7336
DJ_Johnny V, How many pads per car do you use when working with the flex and a menzerna product? I am about to make a pad order and I`m trying to get an idea of how much to order.
Originally Posted by duke727
Before purchasing a spur, it took me at least two pads for each polish to do a medium size car. Now that I spur after each panel, I can do it with one. It works great. Duo Spur Wool & Foam Pad Cleaning Tool: Scrub dirty pads clean with this multi-pupose cleaning tool!
Originally Posted by tdekany
I still believe the UDM is a great machine and will continue to use it on cars with very soft clearcoats, but on harder clearcoats, the Flex will save you time. It is also important to have it for those delicate and tight spots regardless of the clearcoat. I also prefer the UDM to apply the LSP and I like the fact that is has versatility in terms of bp`s and attachements. Even with a Flex or rotary, I strongly believe having a UDM/PC is a wise investment for every detailer.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks