(MUST SEE) Edge adapter for Makita BO6040

**imported_agentf1** · 01-25-2008, 06:46 PM

Originally Posted by jesselyons2002

I don`t know why you would need to buy a flex if you know how to use a rotary.

I already have a rotary and am very proficient with it but the reason I bought the Makita BO6040 is it has close to the power of a rotary and can handle 90% of my detailing needs, about 89% more than my ROB could and it saves me a lot of time on my details since it cuts my cleanup time down to almost nothing. When I use my rotary it sling stuff everywhere but my BO6040 does not sling at all. I also don`t have to wonder if I am leaving any holograms or go over it a second time with my ROB just for a piece of mind, I know it will be hologram free. I do not see the Flex as being more powerful just because it has a slightly bigger orbit and spins slower.

If anybody is in the PA/Del/NJ border area (Delaware County) and has a Flex and would like to get together and compare machine let me know. I would love to try a Flex and would be more than happy to let somebody try out the Makita with the Edge system on it.

**admac** · 01-25-2008, 09:47 PM

not to be dense, but where did you order that adapter?

**wannafbody** · 01-25-2008, 10:09 PM

google EDGE, Autogeek probably can get it too.

**imported_agentf1** · 01-29-2008, 07:28 PM

Originally Posted by wannafbody

google EDGE, Autogeek probably can get it too.

Yes, Autogeek will be selling them.

**imported_DJBAILEY** · 02-01-2008, 06:45 AM

The Makita B06040 has true dual-action. With almost double the power of the PC the spinning doesn`t stop when you apply pressure to the pad like the PC does making it single-action really. The vibrations are significantly lower compared to the PC also. I bought it because I wanted a better ROB than the PC, plus you get to switch it to forced-rotation mode. You get a choice of 2 modes. The Flex is a true DA machine also but only has 1 mode doesn`t it? I keep the 3.5" backing plate on the PC now for doing small or tight areas.

I did buy the super-soft backing plate for the BO6040 which made it work better in the forced rotation mode. The EDGE adaptor looks good but but all my pads are the regular type. Anyone know if there is an adaptor out there so that we could use regular 6, 5 and 3.5" backing plates meant for the PC?

**KnuckleBuckett** · 02-01-2008, 07:06 AM

Just throwing this out there...

EDGE just came out with a much more conveniet quick change adapter for the PC. Much stronger (like that is even required?) than the current version and alot easier to work the release.

Here is a YouTube clip from them about it.

YouTube - New Edge 2000 Industrial Adapter

That said I wish the EDGE folks would get to work and get us a Flex adapter!!!!! C`MON!!! Guys, I know its a pain, but you always came through for us in the past, don`t fail us now!!!

**rwisejr** · 02-01-2008, 09:14 AM

Originally Posted by KnuckleBuckett

Just throwing this out there...

EDGE just came out with a much more conveniet quick change adapter for the PC. Much stronger (like that is even required?) than the current version and alot easier to work the release.

Here is a YouTube clip from them about it.

YouTube - New Edge 2000 Industrial Adapter

That said I wish the EDGE folks would get to work and get us a Flex adapter!!!!! C`MON!!! Guys, I know its a pain, but you always came through for us in the past, don`t fail us now!!!

I don`t think they made it for the PC only the rotary.I have one and love it !!!!Much easier design.I never had a problem with the old ones but this is much easier to release the pads.

**The Edge** · 02-01-2008, 01:49 PM

Originally Posted by KnuckleBuckett

Just throwing this out there...

EDGE just came out with a much more conveniet quick change adapter for the PC. Much stronger (like that is even required?) than the current version and alot easier to work the release.

Here is a YouTube clip from them about it.

YouTube - New Edge 2000 Industrial Adapter

That said I wish the EDGE folks would get to work and get us a Flex adapter!!!!! C`MON!!! Guys, I know its a pain, but you always came through for us in the past, don`t fail us now!!!

Have faith and patience young FlexI warrior, we are always listening and working but these things take time to perfect!

**The Edge** · 02-01-2008, 02:05 PM

Originally Posted by KnuckleBuckett

Just throwing this out there...

EDGE just came out with a much more conveniet quick change adapter for the PC. Much stronger (like that is even required?) than the current version and alot easier to work the release.

Here is a YouTube clip from them about it.

YouTube - New Edge 2000 Industrial Adapter

That said I wish the EDGE folks would get to work and get us a Flex adapter!!!!! C`MON!!! Guys, I know its a pain, but you always came through for us in the past, don`t fail us now!!!

Have Faith and Patience my young Flex-I warrior! We are always watching what the customer wants and are always innovating and adapting to the market. These things take time to perfect and develop but rest assured we are working on it! Keep posted!

Aaron

**DJ_JonnyV** · 02-01-2008, 02:40 PM

Nice, look at that!!! That`s promising to see as I have some Edge pads that I used with my PC that have been sitting idle since the Flex showed up last September.

**The Edge** · 02-01-2008, 03:33 PM

If a picture is worth 1000 words, what is a video worth??

YouTube - Edge 2000 Flex Conversion!!!!!

**KnuckleBuckett** · 02-01-2008, 03:48 PM

Man!!!

That. Just. Rocks!!

Thanks for the update and video!

Let us know if you have a projected sales launch window!

Looking forward to it!

**imported_agentf1** · 02-01-2008, 06:57 PM

Originally Posted by The Edge

If a picture is worth 1000 words, what is a video worth??

YouTube - Edge 2000 Flex Conversion!!!!!

Excellent, you got the adapter worked out for the Flex buffer also. Nice.

**imported_agentf1** · 02-01-2008, 07:01 PM

Originally Posted by rwisejr

I don`t think they made it for the PC only the rotary.I have one and love it !!!!Much easier design.I never had a problem with the old ones but this is much easier to release the pads.

They make them for the PC ROB, Rotary, Makita BO6040 and now even the Flex. I have the first 3 and love using the Edge pads. I rarely use my PC anymore since I got the BO6040.