Reflections Detailing of Utah in a Magazine

**boywonder** · 09-12-2001, 09:17 AM

I bought some 2000 grit sandpaper to work with the touch up paint on my Maxima. I did a test on a spot and the sandpaper worked fine to level it off. Now the next question is whether I use a mild rubbing compound to clear all the scratches out. Would Perfect-It work in a situation like this?

**Brad B** · 09-12-2001, 09:20 AM

That would be a suitable choice.:up

**tonysandiego** · 09-12-2001, 09:34 AM

I`ve had good luck using Wizards Turbo Cut, then FI2 and finally Wizards Finish Cut to get rid of the sanding marks left by the 2000 grit paper. I`ve not used Perfect-It so I`m not sure which product of mine is comparable. Just be patient and take your time and you should be OK.

**boywonder** · 09-12-2001, 04:02 PM

<blockquote class=`ipsBlockquote` >

<em class=`bbc`>Originally posted by Brad B. [/i]
<strong class=`bbc`>That would be a suitable choice.:up [/b]</blockquote>
I`ll be picking that up next week.

**hook** · 09-12-2001, 04:04 PM

I use Perfect-It II fine Cut Rubbing Compound by hand to remove the haze caused by wet sanding. Takes a couple passes, but then is ready for protectant.

Blue Skies,

Andy

**boywonder** · 09-12-2001, 11:53 PM

Judging from everyone`s reaction, I can assume that I am taking the correct course of action.

**boywonder** · 09-13-2001, 04:06 PM

bump

**Greg Nichols** · 12-13-2009, 12:56 AM

I thought it was cool I was written up in national magazine for Car wash and Detailers. Check it out. I don`t know where this will take Reflections Detailing in the state of Utah, but its fun to see me in a mag!

http://www.carwash.com/article.asp?IndexID=6637330

Cheers,
GREG

**gmblack3** · 12-13-2009, 02:40 AM

Congrats Greg!

ancing Dot:

**imported_Flash Gordon** · 12-13-2009, 07:24 AM

Congratulations Greg. Its always nice to recieve recognition for your profession :wizard:

BTW > We are not suppose to put links in our post > Da Rules!