DC,
I think there should be a little button you can see at the bottom edge of the razor head that holds the 3 blades that you push and it lifts up like the hood on a car, and exposes a place under it where all the whiskers fall into.
On mine, you see that area and the 3 little plastic covered shafts that spin the blades - that`s the place I was referring to that when its open, hold the razor upside down and tap it lightly in the sink, and about all the whiskers fall out..
The 3 blade cutter assemblies are suspended with that part that lifts up..
Under that part that lifts up is another little piece of plastic that moves counter clockwise and will come off, exposing the 3 cutter assemblies, which can come out if you want to then take them apart (the little round blade assembly drops out) and they also separate so you can clean a little in there also..
If your Dad`s razor does this as well, just don`t mix up the cutters and the little cups they go into, because they are designed to run in that little cup that is supposed to also help keep them sharp.. I don`t know how well they do keep them sharp and after awhile, it will take longer to shave and may irritate a bit, and that`s when you know its time to change the 3 cutter assemblies...
Or, just do what you want, and it will still work great for a long time..
Yeah, you are right - we manly-men like to shave ourselves.. Its like a ritual sort of thing - just like we saw our Dad`s doing it when we were little..
Hope your new bizz takes off ! I also see lots and lots of headlights that are really cloudy and in need of a clean up..
Dan F
Bookmarks