Noob - Need some advice

**Keithsdateg** · 06-23-2011, 12:35 PM

My buffer/polisher is 200-3300 rpm.. Whats easy? I`ve heard big sweeping motions to keep from burn through. Also, what pad? Wool, Yellow foam, Black foam?

**imported_gewb** · 06-23-2011, 12:48 PM

Welcome!

Where are you located?

Regards,
GEWB

**Nth Degree** · 06-23-2011, 05:12 PM

Originally Posted by Keithsdateg

My buffer/polisher is 200-3300 rpm.. Whats easy? I`ve heard big sweeping motions to keep from burn through. Also, what pad? Wool, Yellow foam, Black foam?

You are wanting to start gentle until you have a better idea of how the paint is reacting. I would recommend starting with an orange LC pad, or even white to be safer. Yes, you want to keep the polisher moving, but you also want to test a small spot. At first I would stay below 1000 rpm for short periods and check frequently. You really will know pretty quickly whether you are improving things or making it worse. Personally, I wouldn`t go straight to a rotary on this, but start with a DA.

Sorry about rinsing the Dawn. I forget that not using a pressure washer makes it more difficult. Next time try rinsing first with just open hose. The majority of the Dawn should float off rather than foam up, then use the sprayer.