Newbie using Blackfire Gloss Enhacing Polish
I am detailing my 2010 Ford F-150. Washed it with Chemical Guys shampoo that strips the old wax...clayed and then washed again to remove any possible oils. My paint is in excellent shape so I applied the Blackfire Gloss Enhancing Polish with a new LC green pad. Waited until doing the entire truck to remove the hazed polish and found it more difficult to wipe of than I was expecting. Instead of the polish being dry (ran my finger through it) it would smear. Quite like a past wax that hadn`t completely dried. I had put the polish on using about 3 small size dots per 1/2 of a door and then tried 3 dots for the entire door. The removing was the difference between "Wiping " it off as stated on the bottle and having to "Rub " it off. I am to old to mess with this sort of problem when I know darn well other polishes wipe off much easier. Anyone have the same problems or have any suggestions. I`m not a professional but have done a few cars over the years. The polish seems to shine up well but there are others that are easier to use. Is it me? or the polish. Working it the open garage...lots of breeze,,,90 degrees and fairly low humidity.