Best products for black car

**imported_Larry A** · 03-29-2011, 10:04 AM

After 105 and 205 if needed, then Poorboys Black Hole followed with Natty Blue. It dont get any better then that.

**imported_Blk5.0** · 03-29-2011, 11:48 AM

Originally Posted by Larry A

After 105 and 205 if needed, then Poorboys Black Hole followed with Natty Blue. It dont get any better then that.

Almost got the black hole. But went with bwfd

**imported_SunDaze** · 03-29-2011, 12:34 PM

Please post some pictures of your results....and what you found to work best for you....
I have also have a black ford and I`m putting together a order....M205 and some pads and just want to know your thoughts....and what products you found gave you happiness
Thanks

**imported_firebird** · 03-29-2011, 01:53 PM

Originally Posted by Merlin

The DA MF system works great. The MF finishing wax D301 is actually a polymer not a carnauba with a very fine S.M.A.T. D301 as a finishing product looks pretty good to me. You can top D301 with BFWD and it should look even better. To apply BFWD I would suggest a LC 5.5" flat blue pad.

If you`re using the complete DA MF system, I hear doing an IPA wipedown is suggested before topping with BFWD or any other sealant, to make sure no bonding issues.
The other option is to use the D300 with the MF pads, then M205 (or choice) on foam pad, then sealant of choice.

**imported_Merlin** · 03-29-2011, 02:57 PM

Originally Posted by firebird

The other option is to use the D300 with the MF pads, then M205 (or choice) on foam pad, then sealant of choice.

I have also done D300/DA MF disc then Menz PO106 or PO85 w/black pad then sealant of choice with excellent results.

I now prefer using D300/MF DA disc over M105. Although D300 is based on the M105 technology it`s not quite as aggressive as M105 (that`s not a bad thing) and it`s MUCH better to work with.