Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesRonkh liked this post
pulled my wheels off and cleaned the insides after winter
Post Thanks / Like - 1 Likes, 0 Thanks, 0 Dislikesmnehls86 liked this post
Washed with the Finish Kare soap, did the wheels with Sonax. Polishing PBL off tomorrow, then jeweling with WG FG and applying gloss coat, and doing trim with C4. Pics to follow!
Use a whole bunch of new products yesterday just so I could enter them for as 3 Word Reviews for the Linus Pauling Day contest:
HD Glass - My new favorite glass cleaner.
HD Touch - Not a great QD. Seemed almost sticky and required lots of extra buffing
HD Express - Too thick to call it a spray wax! Nice stuff for sure, but needs to be applied with a wax applicator for best results.
HD Protect - Very nice interior protectant. Creamy consistency. A little spreads far
Pinnacle Vinyl & Rubber Cleaner & Conditioner -Not sure how much of a time saver this interior AIO was. I had to go back over a few time with a fresh MF in order to knock down high spots.
Weekly wash on the Nissan this morning, this time i did a full 2 bucket wash with 3D Pink soap (been doing rinseless for the past few washes). Didn`t need to reapply PERL on tires since i`ve been layering it on and the tires clean up with standard pressure from the hose,blow dry them with the DP turbo dryer and they`re good as new. Wheels have a coat of FK1000p on so they clean up right away with the leftover soapy solution and a brush/woolies.
Brought it in the garage,wiped hood with IPA and applied a 50/50 of FK1000p and 845(i`m not seeing the same durability from the FK1kp on certain spots as other vehicle i applied to, so i`m trying to see if my rinseless solution is messing with the LSP or what) , re-topped the roof and trunk with FK1000p and done.
Been a long time for a big job. Got what I wanted LOLOL.
Post Thanks / Like - 4 Likes, 0 Thanks, 0 Dislikes
Polished off the PBL v2, fine polished with WG finishing glaze and applied Optimum gloss coat. Also did opti glass coat on all glass, and touched up some trim with C4. Was going to coat my wheels but theyre gonna need to come off for a full deep clean so i can do it properly.
Post Thanks / Like - 1 Likes, 0 Thanks, 0 Dislikesmnehls86 liked this post
Pulled front wheels off the CR-V and cleaned up the wheels and wheel wells. Simple cleaning with Iron-X and APC on the wheels then hit wheel faces and barrels with Reload. Sorry, been so long I don`t remember how to re-size the pictures.
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesAngus liked this post
<---- Looked at threads on detailing board
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
Finished coating my neighbors wheels (2 so far is all he has saved and bought).
Crystal coat with sprayer lid from travel bottle worked well and is an exact fit too.
Steam cleaned/vacuumed my front seats/interior on my challenger and frontier as well.
Brandt K.
<----- Ordered a bunch of detail stuff
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
Yes i wanted to try that before this
And its about the same consistency as pbl so i figured id give a spray top a go.
seemed to work for me. I`m trying to find uses for all this cc i have since ive opened the bottle a few months ago and will see how this spray top works on paint soon. Might coat all my mopar hotwheels cars too.
Brandt K.
There are currently 6 users browsing this thread. (0 members and 6 guests)
Bookmarks