Worked on my new car wheels, 19” wide sport tires.
I know the dealership had something on the tires,
that I’d have to remove.
We have lift off...
I started with Tuf Shine
The browning stopped after 3 or 4 times scrubbed.
But, the product from the dealership was still there in spots. So Tarminator with a scratch pad and MF wipe off.
Better, I thought..
I’m trying to use higher end products on this vehicle, so to clean the wheels I used
Finished with a wash of CGs Diablo, wheel and tires.
New MF woolies, the knuckle guard is dumb. I removed it. Got in the way more then anything.
Also used the CGs as a clay towel lube that I lightly ran over the wheels.
I thought the PA wasn’t working even though I could see the brake disk was purple.
I had a sample of this to compare
I’m good. Time to dry her and add the coatings.
I really liked the wheel coating. My first. Will upgrade now that I’ve tried with something that is longevity challenged.
WG. Paintprep. wipe down of the wheels.
PBL, IGL green removal towels, 9” yellow 500gsm. AMZ towels. GTech. AP2 applicator (all were outstanding).
Last and the most frustrating. The tire coating.
I must not have removed all of the previous products.
The coating was very blotchy ! After all that work, to have the last step basically fail !
I was too upset and didn’t get a picture.
I mean I was Blazin’ up !!
Then I remembered I still had a half bottle of
GYEON TIRE,
so down went one very thick layer. No wipe off.
It saved me ! Covered all the unevenness, and will live to fight another day !
Thanks for lookin’
Bookmarks