Ended up finishing the interior of dad’s car
Corrected the interior trim with 3D One using the Rupes Ibrid nano and a Buff & Shine euro fiber pad.
Coated with some leftover 22ple VX Pro2. Will top it with Finitura to see about this claim of improving scratch resistance on glass coatings by over 500%.
Also cleaned and recoated the leather with Cquartz leather coating
Yeah I got a second coat on the paint and while waiting that recommended time for the 2nd coat, I prepped and coated the wheels with VM1.
What I learned is to follow the wait time on the box and not from what detailed image mentions on their site for leveling out the coatings.
I did apply Finitura to the passenger side of the roof of the car and applied VS1 to passenger side of the trunk. Finitura is definitely slicker between the two.
I also coated the front passenger side with VM1 wheel coating and topped with Finitura. The driver side wheel is just VM1wheel coating. The face of the rear passenger wheels were also coated with Finitura.
Finitura for me worked fine. I did notice that it does require a bit of effort to remove the residual product the longer it sat for me. In my conditions it was ready to be wiped within 2 mins. Anything longer than 5 mins was a pain. A low pile towel about 300 gsm was the way to go for removal.
Bookmarks