Best day of the year so far in North Carolina. It was sunny and over 70. I took the opportunity to wash both cars.
I washed both with Pinnacle XMT Soap and ended up using Mothers Spray Wax on one and Wolfgang Spritz Sealant on the other.
Best day of the year so far in North Carolina. It was sunny and over 70. I took the opportunity to wash both cars.
I washed both with Pinnacle XMT Soap and ended up using Mothers Spray Wax on one and Wolfgang Spritz Sealant on the other.
Al
The Need to Bead
Liquid Natty`s Blue
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
looks good ron. does the natty`s wipe off pretty easy ?
I agree. I found Liquid Natty`s Blue to work best in the sun. When I have used it in the past I always let it "bake" in the sun for 30+min before removal and it was a breeze. I once tried it in the garage and let it sit for 30min and it was a bear to remove. I then backed the car out into the sun and let it sit, and everything was better again.
After the ride, I hosed the Gator down. I need to do a proper wash and refresh the protection.
Al
The Need to Bead
Washed the Dakota today.
Meguiar`s Hyper Wash in the foam cannon and bucket. It did quite well. It has good sticking ability but fairly easy to rinse off. It also cleaned well. Pics were taken about 45 to 60 seconds after application so it has been dripping off. It was totally covered on the initial application.
I ended up rinsing then foaming again without rinsing before starting the <no detailer name> two bucket wash method.
Pressure Washer: 1400 psi
Cam Spray Foam cannon: 1.5 oz to 15 oz water (1/2 reservoir coated truck)
Bucket: 1 oz to 3 gallons
[/QUOTE]
Hyperwash is a nice all around soap: cost effective, cleans well, rinses well, foams well.
Al
The Need to Bead
Love hyper wash! Very good soap. Just about finishing up a gallon. Then onto a gallon of GC MAXI SUDS II.
2018 Chevy Colorado ZR2
www.autiopia.org
I also boxed up my Griot`s foam gun to return for replacement. The nozzle was sticking badly and would not shut off easily. Easy return.
Al
The Need to Bead
Cleaned my steering wheel today. Heres an in progress 50/50 shot.
Also cleaned up my exhaust tips
Before
After
I was in the cleaning mood and threw a little polish on the mufflers themselves even though they can`t be seen until under the car
Working on CTS today. Us my undercarriage washer, foam and wash car. Optimum spray enhancer.
Clean wheels and give them spray sealant. Moreshine the tires...
I cleaned the interior of my Dakota. I vacuumed the interior, used Chemical Guys Nonsense 1:2 on the carpets then applied Mothers Protectant on the interior plastics while listening to Detail Fest classes streaming.
Al
The Need to Bead
Polishing panels at Detail Fest, showing folks the benefits of removing our friends the swirls off the panels.
AutopiaForums is the place to be.
Remember to Shop Autopia-CarCare.com for your Detailing Needs!
There are currently 7 users browsing this thread. (0 members and 7 guests)
Bookmarks