I could never make that happen.
Printable View
https://uploads.tapatalk-cdn.com/201...539ebff0f2.jpg
Feel for Ya !!
Maybe it would have been much
worse without the coating ?
took this pic..hah too damn hot outside, got in clients car to move into garage to cool off and car says Heat Advisory on nav screen
https://uploads.tapatalk-cdn.com/201...427f64f8db.jpg
512, with all those angels you will be fine, look forward to the pics
Cleaned up the cars.
Highlander-
Complete interior performed with vacuum, steam, McKees interior cleaner and protected with Kenotek. TAC Refresh sprayed on all upholstery and ran the AC for a while to circulate.
Exterior was cleaned with TAC Aqua Waterless. Tires dressed with TAC Tire Coat.
S-
Interior cleaned with McKees and protected with Gyeon Preserve.
Exterior cleaned with a 2BW using TAC Mystic Bubble and coated with Gyeon Can Coat. Wheels cleaned with BDX and refreshed with Gyeon Wet Coat. Tires have TW, which is holding up.
(Sent via my mobile device...)
So I got the Foxbody today. It`s a fun ride. Paint correction is probably best it`s gonna get. I`ll get the car repainted down the road. But it`s a good 5-10 footer
Sent from my iPhone using Tapatalk
Picked up some oem Hyper Grey SRT wheels, Mckee`s 37 iron x, degreaser, wash, clay bar, Gyeon prep, Carpro Dlux on Saturday and put them on today. https://uploads.tapatalk-cdn.com/201...0f75cf4371.jpghttps://uploads.tapatalk-cdn.com/201...cfaaef36a9.jpghttps://uploads.tapatalk-cdn.com/201...85eafbae8c.jpghttps://uploads.tapatalk-cdn.com/201...e88d271411.jpg
Spent 14 hrs, removing ceramic coating and recorrecting the paint, then coating it again with cquartz..... long story short, this was the 1st of a few cars I did. After doing 4 others, I knew I can get this one better!
https://uploads.tapatalk-cdn.com/201...0329a7c8de.jpghttps://uploads.tapatalk-cdn.com/201...c8b850b646.jpghttps://uploads.tapatalk-cdn.com/201...b55374ec0f.jpghttps://uploads.tapatalk-cdn.com/201...70e263575d.jpghttps://uploads.tapatalk-cdn.com/201...581b1089da.jpghttps://uploads.tapatalk-cdn.com/201...b26fe1ba6c.jpghttps://uploads.tapatalk-cdn.com/201...3ae907348c.jpg
Sent from my iPhone using Tapatalk
Thanks - gotta remove 3 layers of 2-month old 22ple HPC from my car and re-coat. Likely use Jescar Compound w/ white pad if the white pads worked for you, followed by Gyeon Primer or Scholls S40.
Are you just `going on faith` that it removed the coating or did you verify in some fashion?
I called carpro-us/ skys the limit, and was fortunate to get Corey on the phone. I told him that I wasn`t happy with the correcting on the Aston and wanted to see if I had options. The bottom line came to him saying I needed to remove, recorrect and recoat. When it came to talking about what to use, I mentioned I was thinking menzerna 400 with a few others and from the convo, I was comfortable moving forward. I only did 2/3 passes with no pressure. I realized that when the slickness of a wax feeling came back, I knew the coating was off. To me, Ceramic has a "heavy" slickness to it compared to the slickness of a standard cars paint once polished or waxed
Used a little of everything [emoji1313]
Reflect is about 3000 so to me, it fell right into the line
https://uploads.tapatalk-cdn.com/201...bf23c8146c.jpg
Sent from my iPhone using Tapatalk
Washed my wife`s Malibu yesterday which was coated with gtechniq back in beginning of June. Haven`t had time till yesterday to wash it and it literally took me like 20-25 min to wash and dry including the rims
Sent from my iPhone using Tapatalk
Washed my Tundra again today after 2-3 weeks with out a wash and once again amazed how easy it is to wash with CSL on it. Also beading is still excellent and very even from top to bottom on all panels, no signs of degradation on the lower body panels.