What did you do detailing wise today?

[Angus]

Has anyone used these two wheel products? I tried them once and did not get the results I wanted. The wheel coating showed spots. I used my sidekick to blow dry each wheel. Do I need to use a high GSM microfiber towel then blow dry? Please advise

Sent from my SM-N910V using Tapatalk

Sonax Wheel Cleaner+ is great stuff. Rim shield on the other hand has gotten mixed reviews.

What were your expectations for both products respectively?

[Buster906]

Sonax Wheel Cleaner+ is great stuff. Rim shield on the other hand has gotten mixed reviews.

What were your expectations for both products respectively?

I only wanted clean and protected wheels. No spots or runs

Sent from my SM-N910V using Tapatalk

[Angus]

I only wanted clean and protected wheels. No spots or runs

Sent from my SM-N910V using Tapatalk

Have you seen these write ups on Rim Shield over on AutoGeek?

Q & A with Rob McCrary from SONAX about Rim Shield - Newest SONAX Product!

NEW Product Review - 2 cool products to make cleaning and protecting your wheels fast and easy!

Could be some helpful application tips? Just a thought.

[Bal]

Great question - I`m thinking either Dlux or Wolfgang Uber.

I have some Dlux. Not tried it yet.

[Angus]

I have some Dlux. Not tried it yet.

Maybe I`ll do 2 rims with each and see which one last longer. Might be a interesting test!

[Buster906]

When I clean my wife`s Durango again, I will give the Rim shield another try

Sent from my SM-N910V using Tapatalk

[Buster906]

This weekend lord willing with good weather I will be testing these two products. My truck is ready. Just have to give another bath to get the pollen off.

Sent from my SM-N910V using Tapatalk

[Buster906]

Thank you to McKees 37 for sending me the Crystal vision. An unexpected surprise

Sent from my SM-N910V using Tapatalk

[donbeezy]

almost done cutting the paint. polish up next

[Buster906]

Beautiful blue. What cutting polish are you using?

Sent from my SM-N910V using Tapatalk

[donbeezy]

Beautiful blue. What cutting polish are you using?

Sent from my SM-N910V using Tapatalk

started off with griots fcc but this clear is really hard. switched to jescar compound. seemed to cut a little better. probably finish it off with hd polish

[hot_h2o]

This weekend lord willing with good weather I will be testing these two products. My truck is ready. Just have to give another bath to get the pollen off.

Sent from my SM-N910V using Tapatalk

Let me know what you think of this. I`ve been looking at getting some

[The Guz]

Let me know what you think of this. I`ve been looking at getting some

Just get Mckee`s hydro blue. Guard & Gloss is an ok product. I would rather use something with SiO2 than just a spray on sealant.

[Buster906]

I will share my findings with all

Sent from my SM-N910V using Tapatalk

[trashmanssd]

Well I polished out 2 more of our Mack truck cabs, did one monday Tuesday and did one today polsihed out the hood and cab side but I had to rush it a bit and only got to use M07 on the roof didnt have time to follow it up with polish, truck needs to go out tomorrow. Thats 3rd truck in 7 days, I can say using my new G21 has made the work a lot easier and faster and more enjoyable meaning I am way more willing to do it. Also got to play with a few different polishes I have gathered up. All impressions are on single stage red paint with either a orange or yellow 5" Lake country flat pad, Meg`s M105 works well but wipe down is a pain and it dries out fast, Menzerna heavy cut 400 worked really well finished down awesome and was a breeze to wipe off (my favorite so far), Menzerna Super heavy cut worked well for cutting the roof that was so oxidized that it took 4 pads to do it as they were just gumming up with all the removed paint but it left a little haze not bad but slightly noticeable, Optimum Hyper Compound (spray) worked well for cutting but left very noticeable haze but its so easy prime and to get a nice even amount of product on the pad (may finish better on a less aggressive pad), Wolfgang Uber Compound and Total swirl remover both worked well were easy to wipe down and both finished very nicely as expected compound cut better but finished a tiny bit less and total swirl cut a little less buy finished down near perfect .