Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 31
  1. #16

    Join Date
    Mar 2006
    Location
    White Plains, NY
    Posts
    2,714
    Post Thanks / Like
    Its one of the easiest things to use.



    Just be careful of:



    Headliners that are glued up, you may soften the glue.

    Steering wheels that are already peeling, you will peel the rest of the coating off.

    Radio button markers that are painted on, you may lighten them or remove them.

    Paint chips, you could heat up the area around the chip and get under the clear.



    I say "be careful" not "avoid". Just watch what you are going as you go.
    Detailing Technology - specialista vernice di correzione

  2. #17

    Join Date
    Nov 2008
    Location
    Neenah, WI
    Posts
    1,258
    Post Thanks / Like
    A steam cleaner was the best investment I have ever made.

  3. #18

    Join Date
    Mar 2008
    Location
    Toledo Area
    Posts
    96
    Post Thanks / Like
    any tips AeroCleanse?

  4. #19
    Neutral & Detached heatgain's Avatar
    Join Date
    Jan 2008
    Location
    Mobile, Alabama
    Posts
    552
    Post Thanks / Like
    Just bought a McCullough on sale at Harbor Freight. Yes I`m aware it`s a cheap steamer but it`s a good cheap steamer, at least according to many reviews I`ve read.

    And, being an enthusiast and only an occasional detailer for pay, I can`t spend $700 for a steamer.

    Haven`t tried it on a vehicle yet, but all our jewelry in the house is now so clean and sparkly.
    Gary
    The Irate Magistrate
    Neutral & Detached

  5. #20

    Join Date
    Jun 2005
    Location
    Chicago USA
    Posts
    1,884
    Post Thanks / Like
    Quote Originally Posted by jdoria
    Its one of the easiest things to use.



    Just be careful of:



    Headliners that are glued up, you may soften the glue.

    Steering wheels that are already peeling, you will peel the rest of the coating off.

    Radio button markers that are painted on, you may lighten them or remove them.

    Paint chips, you could heat up the area around the chip and get under the clear.



    I say "be careful" not "avoid". Just watch what you are going as you go.


    I`ll go ahead and say flat out avoid headliners...
    <p class="bbc_center">Ivan Rajic - LUSTR Auto Detail</p>
    <p class="bbc_center">(773) 715-4198</p>
    <p class="bbc_center">info@lustrdetail.com</p>
    <p class="bbc_center">www.LUSTRDetail.com
    Chicago, Illinois

    Â`</p>
    <p class="bbc_center">Recognized as One of the Top Nine Auto Detailers in the US by AutoWeek Magazine!!

  6. #21

    Join Date
    Dec 2003
    Location
    California
    Posts
    1,154
    Post Thanks / Like
    Headliners...put a towel on the triangular brush, steam it nice and hot, turn off steam and then wipe headliner. No direct steam should hit the headliner.



    You can also spray a light mist of APC on the towel first.



    Rob



    You should buy Renny`s DVD so you can learn all the uses, tricks, and tips!

  7. #22

    Join Date
    Mar 2008
    Location
    Toledo Area
    Posts
    96
    Post Thanks / Like
    you wouldnt happen to have a used one just laying around would ya?

  8. #23

    Join Date
    Mar 2009
    Posts
    214
    Post Thanks / Like
    I just bought a euro-steam es2100 and it looks very similar -the gauges and buttons are the same, just the placement is different -and even the hose button controls are identical. The only difference I can spot is that my hose has steal mesh around it.



    Does yours have the hot water jet too?

  9. #24

    Join Date
    Mar 2008
    Location
    Toledo Area
    Posts
    96
    Post Thanks / Like
    yeh the 3rd button on the machine and then the back button on the right side of the wand gives the hot water stream.

  10. #25

    Join Date
    Nov 2008
    Location
    Neenah, WI
    Posts
    1,258
    Post Thanks / Like
    Quote Originally Posted by Polished&Waxed
    any tips AeroCleanse?


    Watch Kevin`s video`s on youtube.com Not the same machine, but same technique.



    YouTube - kleencar`s Channel

  11. #26

    Join Date
    Mar 2008
    Location
    Toledo Area
    Posts
    96
    Post Thanks / Like
    do you start with the 3" round brush on the door panel then seat, under dash, then the carpet with the same brush, then go to the small nylon brush and do cup holders, console in between seat and console then the dash? Also do you vacuum last? thanks

  12. #27

    Join Date
    Jun 2008
    Location
    Atlanta and Miami
    Posts
    332
    Post Thanks / Like
    I just watched Kevin`s videos and found them pretty informative. I think he damaged the leather with the way he used the steamer, though. Maybe Judy wants to throw in a comment.

  13. #28

    Join Date
    Nov 2008
    Location
    Neenah, WI
    Posts
    1,258
    Post Thanks / Like
    Quote Originally Posted by Quality Leather
    I just watched Kevin`s videos and found them pretty informative. I think he damaged the leather with the way he used the steamer, though. Maybe Judy wants to throw in a comment.


    What would make you think he damaged the leather?

  14. #29
    SuperBee364's Avatar
    Join Date
    Apr 2007
    Posts
    4,710
    Post Thanks / Like
    Quote Originally Posted by Quality Leather
    I just watched Kevin`s videos and found them pretty informative. I think he damaged the leather with the way he used the steamer, though. Maybe Judy wants to throw in a comment.


    Quote Originally Posted by AeroCleanse
    What would make you think he damaged the leather?




    It`s hard to say for sure, but I`m inclined to agree with Quality Leather. Most car leather has a protective coating on it. Using a steam cleaner that aggressively will definitely remove any finishing agent on the leather. Magic erasers will do the same thing by abrasion. So even if there`s no damage immediately evident, removing the finishing agent makes the leather much more vulnerable.



    Steam is a great way to clean, for sure, but it can also cause huge amounts of damage very quickly.



    Who knows.... maybe the leather in that video didn`t have a finish on it, and his method was appropriate. Since it`s impossible to see for sure, let`s give him the benefit of the doubt. However, I would never go after leather that aggressively with a steamer.
    Sage advice from Greg Nichols: "Hey, Supe? When you`re trying to get the air bubble out of your syringe of Opti-Coat, don`t point it at your face, mmmkay?"

  15. #30
    Greg Nichols's Avatar
    Join Date
    Mar 2009
    Location
    Great State of Utah
    Posts
    1,935
    Post Thanks / Like
    Quote Originally Posted by blk45
    That`s the same one that he has, isn`t it Greg?


    The exact same one! It is the same one Kevin and Renny sell too. I know that Jimmy Buffet has three of them going all the time in his shop, and they are no problem for him.



    GREG
    Reflections Detailing of Utah
    "Detailing for the Discerning owner"
    State of Utahs most experienced detailing detailer
    Meguiars/Ford Detailing team SEMA 2010, 2011

    duPont Registry Endorsed Detailer

 

 
Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Steamer - Do I need one?
    By bswombaugh in forum Interior Car Care
    Replies: 7
    Last Post: 04-18-2014, 10:54 AM
  2. What steamer to buy?
    By surfninjab in forum Interior Car Care
    Replies: 5
    Last Post: 07-29-2013, 07:21 PM
  3. Who has the TR5 or TR6 steamer?
    By imported_rydawg in forum Professional Detailer General Discussion
    Replies: 8
    Last Post: 09-06-2012, 02:12 PM
  4. VM-3000 Steamer Vs VX-5000 Steamer
    By silvermesa in forum Auto Detailing 101
    Replies: 7
    Last Post: 01-09-2012, 01:57 AM
  5. need new steamer
    By Envious Eric in forum Professional Detailer General Discussion
    Replies: 5
    Last Post: 05-14-2009, 09:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •