Wolfgang Questions

**C_Rock77** · 11-05-2004, 02:56 PM

Well, I finally decided to try out some Wolfgang. I`ve been a proponent of Klasse, 4*, and NXT on mine and clients` cars. The AIO/UPP combo is my favoite.

I heard the WG supplied a "warmer, wetter" look than the UPP. I figured I`d try it out. I bought the exterior concourse pkg with the auto bathe, cleanser, and sealant.

I have a PC 7424. Has anyone used the PC for WG application? I usually use the red Megs (Cutting) pad to apply AIO. It seems to do a nice job. Would you recommend the same for WG? Does anyone use the PC for WG, or is it better to apply by hand?

Another question...I regularly layer 2-3 layers of UPP on my car... Is that possible with WG? I can see the difference between the layers of UPP. Is there a noticeable difference if you CAN layer WG on top of itself?

Thanks Guys and Gals

**Jngrbrdman** · 11-05-2004, 02:59 PM

WG has the pre-sealant cleaner and the sealant itself. If you have a neglected finish, then the red cutting pad would be a good idea. Otherwise its not necessary. I would suggest a softer pad if you aren`t trying to remove swirls or oxidation with the PC. Basically all using a PC is going to do is make the job go faster and help spread the product out. I use a PC for everything except for paste waxes. Its definitely a good tool to use to apply WG.

You can layer the WG sealant on top of itself. You should see what it looks like with three layers. Its pretty impressive.

**Nickc0844** · 11-05-2004, 03:23 PM

Here is a review I did as soon as Wolfgang came out using via the PC
http://www.detailcity.com/showthread.php?t=2919

I later applied with the PC and achieved similar results. The only downfall I`ve seen with the product is the durability, as others have found as well.

**C_Rock77** · 11-05-2004, 03:24 PM

Well, Anthony, the finish has some marring. I noticed it. It looks kinda bad on the DARK green.

I was probably going to hit it with some DACP on the red pad. I followed your suggestion and have one pad for each product. Already have one red pad for DACP and AIO. I`ve got one brand new red pad. Do you see any detriment to using a red pad with the WG cleanser?

**Beemerboy** · 11-05-2004, 03:26 PM

I`ve used the WG polish with my PC using a cutting pad or polishing depending on what I needed done. It does a great job so I would say yes you are on the right trackwith a PC
I think that the high gloss sealant is one of the best shines I have seen. I have also always done this by hand that`s just me. I have read that many here use a PC with a finish pad for sealant.

IMO you can`t go wrong with WG line-up.

**Totoland Mach** · 11-05-2004, 04:46 PM

I use WG sealant with a Meg`s 9006 pad. Works great on my wife`s Pathfinder (metallic brown) and have also used it on my `03 Mach 1 with excellent results.

I especially like the durability of WG on the Pathfinder which is a daily driver. The Mach is a show/limited driver which stays in the garage under a weathershield, so pretty much anything I use is good.