Looking for some wisdom

[njcarting1]

I have spent several hrs looking,reading,and working towards a best case for me.I have started using my PC,pb ssr line pb exp and natty`s.I like the results thus far.I am sure I need more hrs with the pc but the vehicles and panels I have done have all looked wonderful.

I do not have a "POLISH" I start with clay,2.5 then 2.0 bh,and end with ex-p.My question is,will adding 2-3 coats of natty`s blue and some red give me added shine?wetness,durability?

I saw here someone said that after a sealant adding wax will ???????? attract dirt?? to the finished product,cause cloudiness,or did I misunderstand the thread?

I just would like to know if all the steps are taken in the prep and sealant will I just be able to maintain with the wax per weekly application.

And also do I in fact need to use a polish after bh,wd and then exp? or just the ssr line then wd,exp then wax.

[Poorboy]

I have spent several hrs looking,reading,and working towards a best case for me.I have started using my PC,pb ssr line pb exp and natty`s.I like the results thus far.I am sure I need more hrs with the pc but the vehicles and panels I have done have all looked wonderful.

I do not have a "POLISH" I start with clay,2.5 then 2.0 bh,and end with ex-p.My question is,will adding 2-3 coats of natty`s blue and some red give me added shine?wetness,durability?

I saw here someone said that after a sealant adding wax will ???????? attract dirt?? to the finished product,cause cloudiness,or did I misunderstand the thread?

I just would like to know if all the steps are taken in the prep and sealant will I just be able to maintain with the wax per weekly application.

And also do I in fact need to use a polish after bh,wd and then exp? or just the ssr line then wd,exp then wax.

the SSR`s are polishes for higher gloss you might want to add SSR1 and apply with a finishing pad before the Black Hole or you can use PwS instead and get a little added protection in the process...
You can apply the Natty`s as often as you feel you want to, I know rabbi & ron do

[Jeremy]

ssr2.5
ssr1
glaze
sealant
wax

[njcarting1]

the SSR`s are polishes for higher gloss you might want to add SSR1 and apply with a finishing pad before the Black Hole or you can use PwS instead and get a little added protection in the process...
You can apply the Natty`s as often as you feel you want to, I know rabbi & ron do

That`s what I needed to know,just want the best finish I can achieve after the long process is complete.

Thanks again...

[Beemerboy]

I can agree with Jeremy if you want that super gloss wet look...think about a glaze like PB BH or WD to be applied before you lay down the sealant or wax...makes a difference

[RobertP]

my routine...

SSR2.5
SSR1
Black Hole
Nattys Red
Nattys Red
Nattys Red
Nattys Red
Nattys Red

[JaredPointer]

Tha Jared says you need some Pro Polish.

[Ronkh]

ssr2.5
ssr1
glaze
sealant
wax
wax
wax
wax
wax
wax
wax
wax
wax
wax
wax
repeat process all over again

corrected

[Ronkh]

You can apply the Natty`s as often as you feel you want to, I know rabbi & ron do

me ?

[Jeremy]

corrected

[tmacsad]

You can apply the Natty`s as often as you feel you want to, I know rabbi & ron do

Try every hour on the hour

[Poorboy]

me ?

you are president of the wax wasters club aren`t you

[tmacsad]

you are president of the wax wasters club aren`t you

I R his running buddy

[Ronkh]

you are president of the wax wasters club aren`t you

Until Rabbi puts on another coat.

[Ronkh]

I R his running buddy

How many coats/how often ?