#7 over sealant before WAX?

**joe.p** · 10-26-2006, 01:03 PM

Originally Posted by Junebug

Charles - I read the hype on #7 on the description and got hooked. .

Its a PITA if you leave #7 on too long or until it dries.. Megs is to be used sparringly when applied ..then remove WOWO..I didn`t find it to be so hard to work with.. Application ,weather,humidity all figure in when using any product..

If i listened to the Horror stories removing Megs #16 i would have never had the chance to give it a shot..Now look people are looking High and Low for the wax..

**Bobcat** · 10-26-2006, 03:25 PM

Joe, I thought WG glaze sucked till I learned to PC the sh*t out of it with a LC white pad and then wipe off immediately with a MF towel, still ain`t as easy as XMT, but then I would rather use WG sealer than a carnuba as a LSP.

**joe.p** · 10-26-2006, 03:51 PM

Originally Posted by Junebug

Joe, I thought WG glaze sucked till I learned to PC the sh*t out of it with a LC white pad and then wipe off immediately with a MF towel, still ain`t as easy as XMT, but then I would rather use WG sealer than a carnuba as a LSP.

I have some XMT glaze i`m looking forward to trying.... Wax/sealant ..for me it depends on our change of seasons..this winter its Zaino with no topper..in the summer i like the carnaubas because the weather conditions allows me to layer a coat at anytime...

**Bobcat** · 10-26-2006, 06:25 PM

Joe, I was told XMT glaze is if you are going to top with a carnuba, so I assume being in Chi-town going into Nov, you`re looking to do it in the Spring?

**joe.p** · 10-26-2006, 06:36 PM

Originally Posted by Junebug

Joe, I was told XMT glaze is if you are going to top with a carnuba, so I assume being in Chi-town going into Nov, you`re looking to do it in the Spring?

yeah..i`m gonna wait it feels more like winter then fall..Look at the snow colorado geez..

**sneek** · 10-26-2006, 06:41 PM

Originally Posted by Jen@autogeek

I haven`t heard that, but I am certainly no expert on Meguiar`s products either. That is why I say to talk to the manufacturer if in doubt. It may be possible to use the #7 under a sealant of the same line since the products are forumulated to work as a system, but I know I would hesitate to use #7 under any non-Meguiar`s sealant. I would call Meguiar`s to find out the definitive answer.

I am pretty sure that they say it does not effect bonding.

Do Glazes/Fillers Affect the Bonding of NXT?