Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Pretty neat stuff u can use it as a towel wash I’ve been using the pure rinseless for a little under a year it is great stuff. The cleaning power is hard to explain when comparing it to other rinseless washes because it is different. I also use it on interior, after polish as an oil remover, window cleaner.
before I coat a car I have this in sprayer and lay it on heavy and let it dwell then wipe up as it’s drying I’ll use ipa to me I believe I’m getting a cleaner surface than just ipa
I love that it doesn’t bead up on coated cars and has ability to wet the whole panel.
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Yeah I’m finding many off label uses for it, and also for the prep wipe.
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
acuRAS82
Yeah I’m finding many off label uses for it, and also for the prep wipe.
They actually now recommend this on their site. Also mention folks using 384:1 ratio...
Sent from my iPhone using Tapatalk
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Does anyone have any experience with Feynlab`s regular car soap, Pure Wash? I`ve got a few soaps left to finish up, but I`m finding myself reaching still for Pure Rinseless even though it`s warm enough to do bucket washes.
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
Britsdaddy
Does anyone have any experience with Feynlab`s regular car soap, Pure Wash? I`ve got a few soaps left to finish up, but I`m finding myself reaching still for Pure Rinseless even though it`s warm enough to do bucket washes.
It’s good. Nice lubricity and cleans well. Rinses clean as well. Not the most sudsy soap but it is nice.
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Older post..
I`ve recently become a RW/WW fanboy for the convenience.
Has anyone used 3D`s foaming waterless? Where can i get a foam nozzle for a spray bottle like carpro inside i wonder? Maybe i will just buy a bottle of carpro inside too lol
I have carpro ech20 and N914 on the way. Ech20 leaves great gloss, can be steaky. I found just waiting for it to flash/dry really helps when your using it has a WW.
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
noorth
Older post..
I`ve recently become a RW/WW fanboy for the convenience.
Has anyone used 3D`s foaming waterless? Where can i get a foam nozzle for a spray bottle like carpro inside i wonder? Maybe i will just buy a bottle of carpro inside too lol
I have carpro ech20 and N914 on the way. Ech20 leaves great gloss, can be steaky. I found just waiting for it to flash/dry really helps when your using it has a WW.
You can buy foaming regular sprayers from AG. For the 3D you should use a pump sprayer like a IK or a Marolex foamer.
I ‘ve seen it available in canada can’t remember supplier.
The Ammo frothe is a better value as it’s dilutable
Sent from my iPhone using Tapatalk
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
Coatings=crack
You can buy foaming regular sprayers from AG. For the 3D you should use a pump sprayer like a IK or a Marolex foamer.
I ‘ve seen it available in canada can’t remember supplier.
The Ammo frothe is a better value as it’s dilutable
Sent from my iPhone using Tapatalk
I only want it for bird ````. I doubt i will be picking up those 50$ foam sprayers but your never know, i`ve seen videos and the amount of pumping to get it to foam? I would throw it in the garbage.
I have 2 options actually detail popo has a foaming waterless has well in canada.
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
noorth
I only want it for bird ````. I doubt i will be picking up those 50$ foam sprayers but your never know, i`ve seen videos and the amount of pumping to get it to foam? I would throw it in the garbage.
I have 2 options actually detail popo has a foaming waterless has well in canada.
An Ik is about $35. Get one from AG during a 25% off sale. A foaming waterless feels so maybe ch safer than a normal waterless. Only way I waterless anymore.
AG sells Adg Fuzion which can be used as a bucketor waterless wash.
If it’s slightly dirty i’ll do a rinseless. If it’s normal dirty i use a Foam WW with a pretreat.
Really dirty a bucket wash.
Sent from my iPhone using Tapatalk
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
They have some pump up sprayers at Harbor Freight for about $7.
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Clearing up a bird sh*t earlier, my newly acquired Feynlab Pure Rinseless took a significant chunk out of the hydrophobics of IGL premier which was until today working well on a standalone basis (although there is ageing 11 month TAC moonlight and 6 month SC mist buried underneath). This is as WW dilution @ 384:1.. WHY DID I NOT READ THIS THREAD BEFORE BUYING AND TRYING IT!!!!
This stuff is crazily powerful - I`m just not sure a) I would trust it on the freshly applied CarPro SiC on my own car despite how chemical resistant CarPro claim, b) any sealant would hold up to this for any period of time. I have a test panel with Moonlight, KKD Revolve and Premier on it and will bombard it over the next few weeks to see what the longer term effects are. Has anyone found a safe but effective dilution beyond 384:1?
I may end up giving it away / trying to find alternative uses such as removing dust post polishing, pre-IPA wipedown. I don`t buy into RW or WW anyway, this was bought primarily as a bird sh*t remover..
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
wannafbody
They have some pump up sprayers at Harbor Freight for about $7.
“Foaming”
Sent from my iPhone using Tapatalk
WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
atbalfour
Clearing up a bird sh*t earlier, my newly acquired Feynlab Pure Rinseless took a significant chunk out of the hydrophobics of IGL premier which was until today working well on a standalone basis (although there is ageing 11 month TAC moonlight and 6 month SC mist buried underneath). This is as WW dilution @ 384:1.. WHY DID I NOT READ THIS THREAD BEFORE BUYING AND TRYING IT!!!!
This stuff is crazily powerful - I`m just not sure a) I would trust it on the freshly applied CarPro SiC on my own car despite how chemical resistant CarPro claim, b) any sealant would hold up to this for any period of time. I have a test panel with Moonlight, KKD Revolve and Premier on it and will bombard it over the next few weeks to see what the longer term effects are. Has anyone found a safe but effective dilution beyond 384:1?
I may end up giving it away / trying to find alternative uses such as removing dust post polishing, pre-IPA wipedown. I don`t buy into RW or WW anyway, this was bought primarily as a bird sh*t remover..
It trashes sealants (including sio2) and waxes. Worked wonders on my cquartz UK3. Just cleaned it up to add a fresh topper.
Only used as a Rinseless and only use when wanting to re apply something.
Sent from my iPhone using Tapatalk
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
Coatings=crack
It trashes sealants (including sio2) and waxes. Worked wonders on my cquartz UK3. Just cleaned it up to add a fresh topper.
Only used as a Rinseless and only use when wanting to re apply something.
Sent from my iPhone using Tapatalk
Do you use it regularly or only when adding a new topper? I wonder how it`d hold up using it regularly!
Sent from my LYA-L09 using Tapatalk
Re: WW/RW Showdown - N-914 vs Feynlab Pure Rinseless
Quote:
Originally Posted by
atbalfour
Do you use it regularly or only when adding a new topper? I wonder how it`d hold up using it regularly!
Sent from my LYA-L09 using Tapatalk
I would use alkaline products alot in it’s second year. BH auto foam and FPR at least once a month. A Mckee’s coating prep soap every 3 months.
Through 20 months the coating was performing amazing. I did top at 18 months with CanCoat.
It didn’t need it at all but wanted to use it up.
Sent from my iPhone using Tapatalk