Originally Posted by
Swanicyouth
So, I have a trick I`ve shared before - that may be worth repeating... Mind you, I only recommend doing this as a last resort. However, I have done this on paint without causing damage - so I know it`s safe & quite effective if you are careful...
1. Get a MF wax applicator pad & prime it with a liberal amount of some heavy cut compound.
2. Then, soak the pad with Goo Gone / Goof Off/ or mineral spirits. After that, apply some working compound to the pad.
3. Then, get a heat gun & warm up the glue until it`s pretty hot.
4. Then, buff the glue with some downward force (using your hands) while the glue is hot. You can keep everything hot while you buff - you may get some smoke. Don`t set your self or anything on fire. Keep the pad wet with whatever you are using. Again it will be hot & you will get smoke - so don`t set yourself on fire.
I`ve found the above way to work when absolutely nothing else will, or when something else is taking forever.
Bookmarks