PBW Foam Soap (Beta) Review

[Angus]

Over the weekend I had a chance to use the beta test sample of PB Foam Soap Steve and Dwayne generously provided for testing. Thanks fellas!



For my test I’ll be foaming up my very dirty Honda Civic that’s been sitting under a tree for about a month:



I decided to use a standard amount of soap @ ~1oz of soap per 32oz of warm tap water in my MTM foam cannon. By doing so I should be able to compare how PBW Foam Soap foams up against other foam soaps I`ve used - ie CG Honeydew, McKee’s Power Wash etc..

Time to foam! As soon as soap starts flying I’m immediately hit with a nice grapey smell - as others have commented - I love it. Feedback #1: Do not change the smell - who cares if someone else soap smells like grapes? Not me!!

Action shots of the foam:



Rear bumper:



Drivers side:



Dripping off the rear wheel well:



Dissolving dirt on the front hood:




Nice cling time after sitting for 5mins:



Good tight foam drip silhouette lines




8 oz or so of product still left in bottle:



Conclusion
Poorboys has a winner with this product. As my photos showed this new soap clings just as well if not better than CG Honeydew or McKee’s Power Wash @ the same soap to water ratio in a foam cannon. Plus it rinses cleanly off not leaving anything behind. My overall feedback is - don’t change a thing. Beta testing is done.

[Poorboy]

Nice job .. Thanks for the review ...

[512detail]

nice review.. man I need a pressure washer and foam lance

I used 4 ounces and didn`t get close to that kind of foam out of my gun

[512detail]

the only thing I suggest changing is sending me some more so I can confirm its awesome! haha

[Poorboy]

nice review.. man I need a pressure washer and foam lance

I used 4 ounces and didn`t get close to that kind of foam out of my gun

that`s why we did a poll to find out what kind of foam guns are out there and try to get enough info to see how it works in each of them ... my foam gun with good water pressure put out a heavy foam when opened fully...

the only thing I suggest changing is sending me some more so I can confirm its awesome! haha

soon enough .. just a couple more things to tweak and then get a label rolling ...

[ShawnF350]

Great review Angus!

Your using a gas power washer?

Im hoping Poorboys gives away a gallon to one of the reviewers in a giveawsy drawing.
One lucky winner.
Heck maybe a 5 gallon jug.

[512detail]

that`s why we did a poll to find out what kind of foam guns are out there and try to get enough info to see how it works in each of them ... my foam gun with good water pressure put out a heavy foam when opened fully...



soon enough .. just a couple more things to tweak and then get a label rolling ...

I got no issues with the level of foam I got out of my gun..perhaps I need higher pressure water then


completely agree with the rinsing off no issues..I had a water spotted SRT and foamed it and rinsed and BAM no streaks or spots..didn`t have any dirt on it just water spots

[Angus]

Nice job .. Thanks for the review ...

Thank you for the opportunity! It`s fun being part of the beta testing process.

nice review.. man I need a pressure washer and foam lance

I used 4 ounces and didn`t get close to that kind of foam out of my gun

Dude. How do you not have a foam cannon? Get on it! I haven`t touched my foam gun since picking up a cannon.

[Angus]

Great review Angus!

Your using a gas power washer?

Thanks, Shawn! I use an electric pw: AR Blue 383: 190 psi/ 1.5 gpm

Im hoping Poorboys gives away a gallon to one of the reviewers in a giveawsy drawing.
One lucky winner.
Heck maybe a 5 gallon jug.

Me like this idea!

[rlmccarty2000]

The hardness of the water will affect the level of foaming in a foam gun. Does it also affect foaming in a foam lance?

[GearHead_1]

Nice review Angus.

[GearHead_1]

...Im hoping Poorboys gives away a gallon to one of the reviewers in a giveawsy drawing.
One lucky winner...

What`s this one reviewer of which you speak?

[Angus]

The hardness of the water will affect the level of foaming in a foam gun. Does it also affect foaming in a foam lance?

Yes it will.

Nice review Angus.

Thanks!

[mjlinane]

Excellent review!

[Smack]

Nice review Ian!

Dang that foam is thick!!! Nice to see it stuck around on the paint for quite some time rather than just sliding off.

Is this a mx type Wash, Wash `N Wax, etc?