5 Coating Adhesion Test to CarPro Essence Review!

[donbeezy]

exactly what I was looking for! i love reading up on these type of things


Sent from my iPhone using Tapatalk

[Troy@Protekt]

Does that make one remove the clear coat from the surface to recoat a panel?

Your telling no other coating bonds to the paint surface, correct?

Opti-Coat Pro is unique in many ways because of this fundamental difference in chemistry. Opti-Coat–Pro becomes one with the paint instead of suspending nano particles of a harder substance in a resin. This gives Opti-Coat Pro far superior chemical resistance, as the chemical must break down the SiC, and not break down a resin holding SiO2 nano particles.

Based on what Yvan says here, they all "bond" with the paint but Opti-Coat bonds directly instead of using a resin as a medium. Let me be clear. I am not claiming to be an expert on the chemistry of coatings. I`m simply relaying info that was given to me to explain what makes OCP unique. Based on this information, I`m guessing the use of Essence would hinder the Opti-coat`s ability to bond directly to the paint.

As far as removing to re-coat a panel. Any good coating is going to require a compound or sanding to remove. In order to insure that the coating is removed, you would be cutting into the very top layer of the clear coat.

[allenk4]

Steel melts at 1370 F, the car will melt before either OCP or a "less durable" SiO2 coating like CQuartz

[donbeezy]

so you`re saying I can fireproof my paint with ocp?!?!


Sent from my iPhone using Tapatalk

[Detail Impressions]

Steel melts at 1370 F, the car will melt before either OCP or a "less durable" SiO2 coating like CQuartz

Common sense will take you the answer to this.
I can take a polish/Compound and compound any of the coatings off. Bet I do not need 1370F to remove the coating
I will take it a step deeper bet I can take factory clear coat off and yes not need 1370 f to remove the clear coat.

Guys think before you drink the coating manufacture`s kool aid

[Trewarin]

Common sense will take you the answer to this.
I can take a polish/Compound and compound any of the coatings off. Bet I do not need 1370F to remove the coating
I will take it a step deeper bet I can take factory clear coat off and yes not need 1370 f to remove the clear coat.

Guys think before you drink the coating manufacture`s kool aid

They listed where it falls on the MOHS scale simultaneously.
It`s useful information.

[512detail]

digging up this thread

any more updates?

[RaysWay]

digging up this thread

any more updates?

Jesse will be back in the office tomorrow. We`ll see if he has any updates...

[512detail]

Jesse will be back in the office tomorrow. We`ll see if he has any updates...

sweet...because im scared to essence a car before PBL if it might affect the bonding even a bit

im running my own test on my roof with essence and a few paste`s but I doubt I will stick with it long enough to provide any good feedback

[Priyaka]

Just read this thread. Some great information here. Looking forward to seeing the update. Thanks Jesse.

[mnehls86]

Jesse will be back in the office tomorrow. We`ll see if he has any updates...

So what ever happened here? Any updates Jesse? I really want to know how the Blackfire Coating is doing.

[512detail]

I sw jesse when i called to check an order..he said he will update when he gets the time

Its our fault, we keep them really busy,

[nothingface5384]

Bump

[hdez]

Bring on the updates

[Ronkh]

Bumping for update