Review: Dramm Shutoff Valve

[Spilchy]

Spilchy,
Glen and I would like to know if you had any luck finding the QD for the Dramm shut off valve..

joe

Yeah, I found it at ONE place, but haven`t contacted them yet. I`m hoping they will fill an order for a small fry like me. They do not have Internet shopping there.

Once I get the skinny, I`ll spill the beans.

[glen22]

Yeah, I found it at one place, but haven`t contacted them. I`m hoping they will fill an order for a small fry like me. They do not have Internet shopping there.

I left email with DRAMM there is a base right here in WI. only thing is I only see case prices "like 24 items or there around". but I did ask where I could get them so I will see what they say.

[Spilchy]

The guy Andrew at the place Joep mentioned indicated to me in an e-mail that in a month he may stock them.

I just wish these places would use the post office for tiny orders like quick connectors. The shipping equaled the cost of the tiny item through UPS.

On a side note, I ordered a 6" counterweight from Coastal Tool about 3 years ago. The piece was a couple dollars. I contacted them and they dropped it in the mail for $1.50 shipping - the cost of the shipping plus a few cents for a bubble envelope. Great guys over there.

[joe.p]

The guy Andrew at the place Joep mentioned indicated to me in an e-mail that in a month he may stock them.

I just wish these places would use the post office for tiny orders like quick connectors. The shipping equaled the cost of the tiny item through UPS.

On a side note, I ordered a 6" counterweight from Coastal Tool about 3 years ago. The piece was a couple dollars. I contacted them and they dropped it in the mail for $1.50 shipping - the cost of the shipping plus a few cents for a bubble envelope. Great guys over there.

Spilchy the 6" CW is down to a $1.50 great price. I;m glad you like them because this is where i may order my makita 9227 from..

[Spilchy]

The shipping went down to a $1.50, not the counterweight! The shipping previously was like $6.00 UPS for that little sucker before I asked them if they could work with the shipping.

That`s where I bought my Makita too. I used it 3 times and am looking to possibly sell it. I want another rotary brand.

[97F1504x4]

The guy Andrew at the place Joep mentioned indicated to me in an e-mail that in a month he may stock them.

That was actually me that gave you Andrew`s site but no big deal.
Does anyone happen to have a place where we can view the differences in these larger QC and Shutoff valves.

Richard

[glen22]

That was actually me that gave you Andrew`s site but no big deal.
Does anyone happen to have a place where we can view the differences in these larger QC and Shutoff valves.

Richard

NOT YET!! I have emailed DRAMM so we will see what they say. I didnt even see the 755 qc on there site though.

[Spilchy]

NOT YET!! I have emailed DRAMM so we will see what they say. I didnt even see the 755 qc on there site though.

Any update from them about the 755? I found ONE place online but haven`t contacted them yet.

The place that Richard mentioned the discount from (here) has the best prices now on the regular connects coupled with the discount.

1 set + 3 additonal male connectors all for $10.30. BUT, shipping is $7.00. I`m too stubborn to spend that much on shipping for a $10 order when it can go via the post office for half that amount

[glen22]

Just thought I would update ,,, I purchased 3 sets of the 775 qd for 4.75 each and also ordered 2 of the 6" handi grip #106G if anyone is interested. I ordered from their WI. office after a couple email from ANDREW DRAMM he suggested to contact JOY or PATTI at this number 18002580848 he said I would get items much faster.

[97F1504x4]

Just thought I would update ,,, I purchased 3 sets of the 775 qd for 4.75 each and also ordered 2 of the 6" handi grip #106G if anyone is interested. I ordered from their WI. office after a couple email from ANDREW DRAMM he suggested to contact JOY or PATTI at this number 18002580848 he said I would get items much faster.

Sounds goood be sure and post pictures and such once you get the parts.

Richard

[joe.p]

Just thought I would update ,,, I purchased 3 sets of the 775 qd for 4.75 each and also ordered 2 of the 6" handi grip #106G if anyone is interested. I ordered from their WI. office after a couple email from ANDREW DRAMM he suggested to contact JOY or PATTI at this number 18002580848 he said I would get items much faster.

Way to go Glen..
Do You have any pics of the 755 QD,also the hand grip.

[glen22]

http://www.dramm.com/html/main.isx?sub=10 yhe handi grip handle is here and the 3/4 " 775 connects also.

[joe.p]

How many QD ,male/female are you guys using..

what will i need to made this work.

1-Fireman Nozzle

1/Dramm shut off valve

1-FG minus the trigger/sprayer..

[glen22]

How many QD ,male/female are you guys using..

what will i need to made this work.

1-Fireman Nozzle

1/Dramm shut off valve

1-FG minus the trigger/sprayer..

just one of each per hose end ... 1female,1 male.

[joe.p]

just one of each per hose end ... 1female,1 male.

So 3 sets of QD will do....

Pardon me,spilchy showed the QD atatched to his nozzle,dramm s/off etc,can you help with the link to his pics..