Easiest cleaner/swirl mark remover

[00GREENMACHINE]

I am having problems removing DACP and SSR 2.5. After applying these products on the car I am having to SCRUB to get them to come off. I dont beleive this should be the way its suspose to be. Am I doing something wrong or is there a easier way to remove them.

[cwcad]

The first thing that I thought of was...what are you using to apply the product? By Hand or PC? The next thing is....how much product? The next question would be...Are you using a QD to help aide the removal process?

Scrubbing should not be in the process. When ever I have happened to get a product that has proved difficult to remove I have used a detail spray with a moisten MF towel to wipe not scrub the area that has proved to be difficult. Most times in that situation I realized that I had put to much product on that particulliar spot.

[Brenton]

Scrubbing means you`ve not worked the product in. THERE IS NO EASY WAY TO REMOVE SWIRLS, except pay someone else. Take a long time on each panel. A long time, really long time.

[Poorboy]

I think PEI has hit the proverbial nail on the head ....if you are having trouble removing a swirl remover then you did not fully work it ...as much enjoyment as people get from polishing and waxing their cars, it`s WORK!!! It takes time, patience and the right combination of product and pads to achieve the desired results. Also don`t use QD`s to prime the pads when using SSR2.5 and don`t use too much...there are many threads on the proper use of both SSR`s and DACP if you check around :punk:

[lonewolf0420]

Here are a couple of post to read:
http://www.detailcity.com/forums/showthread.php?t=15214

http://www.detailcity.com/forums/showthread.php?t=14287

[cwcad]

Thank you Lonewolf0420!!

Terrific links to threads that I was not privvy to because I was in Alaska at the time they were posted. Enjoyed reading the threads and becoming informed. :yes:

[SITopShine]

heres somthing the easiest just reapply the prodoct