Hey there fellow Autopians!
I plan on doing a complete Decon, compound, polish and finally coat my new Mazda 6 GT to protect it from the harsh elements out here in the dry hot dusty desert.
This will be my very first attempt to coat a vehicle so I`m pretty nervous……
I`m still trying to Map out which steps would be best to take for this procedure
So far, this is what I have come up with…….
______________________
Decon & Coating Steps;
1) Power Wash
2) Foam entire car with Meg`s HyperWash
3) Rinse/Sheet/Dry
4) Iron X
5) Agitate Iron X w/ Grout Sponge
6) Foam w/ Meg`s HyperWash
7) Wash using 2 Bucket Method
8) Rinse/Sheet/Dry
9) Clay w/ Meg`s Clay Kit
10) Dry while claying
11) Foam w/ Meg`s HyperWash
12) Power Wash to remove Clay residuals
13) Rinse/Sheet/Dry
14) FG400 w/ 5" Orange Hybrid --->> (If needed)
15) SF4000 w/ 5" White Hybrid
16) IPA wipe down
17) Coat sections using Optimum Gloss Coat
18) buff out high spots
19) sit back, drink a cold one, and enjoy the view!
____________________________________________
If I missed anything Or, if there is Anything else that you can think of whether it be adding or subtracting from the list…Please don`t hesitate to chime in!
All advice, tips, and critiques are welcome as this will be my Very First time Coating a vehicle!
So I`m gonna need ALL the help I can get!
®ick~
Bookmarks