Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    2005 Honda Odyssey. She said it was filthy when she called, I`m glad she is a clean freak and her definition of `filthy` means practically spotless! Interior was in decent shape, mostly just dirty from a road trip. Exterior was really good too, hit with Werkstatt`s Prime and a blue Propel finishing pad and Acrylic Jett by hand. Finished a little past noon and as expected, full overhead sun and silver don`t always look as good on film as in person.



















    ================



    1995 Mercedes C280. Last waxed nearly a year ago (AIO/Tropicare) but still looking pretty decent because it was probably only driven about 4000 miles during that time. Polished the hood and trunk lid with Optimum Polish to remove some light defects then hit the whole car with Werkstatt`s Prime and a blue Propel pad and topped with Acrylic Jett Trigger.



















    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

  2. #2

    Join Date
    Feb 2006
    Posts
    230
    Post Thanks / Like
    looks very good! got any interior pics of the van?

  3. #3

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    1990 Chevy Corvette, dynoed at 535 hp and something like 475 lb-ft of torque. Don`t know if they squeezed on the dyno run. The current owner bought the car 6 years ago from the 2nd owner. The first owner bought the car and spend $60k on modifications to the engine, body, paint, suspension, wheels and tires....rears are 335/35 17s! Anyway, 4 weeks after he got the finished car, he died of a stroke. 2nd owner bought the car from the widow and put around 11,000 miles on it in the 10 years he`s owned it. The last 6 years, the car has been driven less than 20 miles! He had been keeping it at his summer home in Jackson, Mississippi but never registered it so the car can`t legally be driven on the street. Had it trucked here to Dallas after selling his summer home. He is currently debating registering it and keeping it as a weekend toy or just unloading it.



    Anyway, a couple engine shots:



    Washed down with Optimum No Rinse (hey, with only 11k on it, the engine was just dusty!) and dressed with Armor All.











    This is after polishing the side with Optimum Polish using a white LC polishing pad and buffing off with Optimum Car Wax:







    I had to polish out some water stains on the rear deck with Optimum`s Hyper Compound and a green Propel lite cut pad, then went over the whole car with Optimum Polish using a white LC polishing pad and buffing off with Optimum Car Wax and you can see my son Chris topping it all off with Poorboy`s Natty`s Blue:







    Full car shots:



















    The money shot!



    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

  4. #4

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    Quote Originally Posted by the0ne
    looks very good! got any interior pics of the van?


    No, nothing much to see, just looked really clean when we finished. Believe me, if it had been trashed, you would have seen before and afters!
    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

  5. #5

    Join Date
    Nov 2005
    Posts
    465
    Post Thanks / Like
    SICK WORK!!!! Scott, once again, you are the MASTER...none better...!

  6. #6

    Join Date
    Sep 2004
    Location
    DFW, TX (Mesquite)
    Posts
    447
    Post Thanks / Like
    Hot lookin Vette!!



    How did the Hyper Compound and Green Propel finish on the waterspots? Did it leave any noticeable marring or hazing?



    And is that one of the Optimum towels your son is using with the Natty`s?



    Haha I always have a bunch of questions for ya!



    -Mark
    2003.5 Desert Platinum Infiniti G35 Sedan

    Biweekly Routine---Wash: Foam gun + NXT Wash (Microfibers), then topped with #16 or OCW.

  7. #7

    Join Date
    Jun 2005
    Location
    houston tx
    Posts
    400
    Post Thanks / Like
    great job as always



    although i did have one questions, when you apply prime, do you use pc or a rotary?

    if u use a pc, how long does it take you to do lets say a avg size hood, do try to polish the hood or just make a couple of passes to ensure the whole hood is covered?



    I mite try to apply prime with rotary, see if i get xtra slickness out of it

  8. #8

    Join Date
    May 2005
    Location
    DC Metro
    Posts
    978
    Post Thanks / Like
    man, that vette is wicked. very nicely done (as usual!)

  9. #9

    Join Date
    Dec 2009
    Posts
    6,772
    Post Thanks / Like
    That Vette looks stellar!





    Now, where`s Aurora40?

  10. #10
    Detailing Rottweiler 1 Clean WS6's Avatar
    Join Date
    Aug 2004
    Location
    Marietta GA
    Posts
    2,555
    Post Thanks / Like
    That Vette is sick!!! :xyxthumbs Good to see your sons working with you too...best employees on the planet!!!
    Mike
    Sweating the Details Mobile Detailing Service
    Owner/Operator

  11. #11

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    Quote Originally Posted by mrecktid
    Hot lookin Vette!!



    How did the Hyper Compound and Green Propel finish on the waterspots? Did it leave any noticeable marring or hazing?



    And is that one of the Optimum towels your son is using with the Natty`s?



    Haha I always have a bunch of questions for ya!



    -Mark


    Absolutely no marring with Hyper but I didn`t use a cutting pad either. Looked pretty much LSP ready to be honest.



    The towel my son is using is one I get from my Optimum distributor but it isn`t an *Optimum* towel. It looks just like those orange edgeless Viking towels but is noticably softer.



    roadmaster_Tx-I apply it with the PC and basically go over the panel 2-3 times at a moderate pace until Prime pretty much disappears. Absolutely no effort to remove when you do that.



    Sean-Yeah, Bob really has an appreciation for C4s!



    Mike-Chris and my younger son Jason have been helping me now since each was about 10. The funny thing is, when I asked the owner if what specifically he was looking for in the finish after I had polished it, he said "really wet" and my son immediately said "I`ll get the Natty`s Blue".
    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

  12. #12

    Join Date
    Feb 2006
    Posts
    230
    Post Thanks / Like
    may I ask how old are you? your son looks like he is in his 20`s
    Honda Dealership Detailing*

  13. #13

    Join Date
    Aug 2013
    Posts
    1,810
    Post Thanks / Like
    To answer the last question, I believe Scott just turned 97 last year.



    That hood shot on the Vette looks incredibly wet. I`m always blown away by Natty`s Blue on any color. It`s great that your kids enjoy working with you.

  14. #14

    Join Date
    Jan 2002
    Location
    Atlanta, GA
    Posts
    8,402
    Post Thanks / Like
    Excellent work by your son and yourself Scott! The vette`s paint looks fabulous.
    Bryan Burnworth - Atlanta Car Detailing - Peachstate Detail LLC

    Selected as one of the top nine detailers in the US by Autoweek

    Published in the 356 Registry

    The only exclusive Opti-Coat Pro specialist in Atlanta

    All PPF work done by the best in Atlanta Derek Johnson of Atlanta Protective Films

    Follow Peachstate Detail LLC on Facebook here.

  15. #15

    Join Date
    Jun 2005
    Posts
    697
    Post Thanks / Like
    Scottwax, excellent job indeed. The vette`s front end looks really cool. Quick question: When using the Hyper Compound, did you use a PC? Also, do you feel that the Optimum line of polishes and compounds take longer to break down then other polishes and compounds? Thanks!
    Not an ordinary teen

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 3
    Last Post: 10-09-2011, 10:49 AM
  2. 1990 Little Red Corvette 30,000 miles
    By wendell jarvis in forum The Detailers Showcase
    Replies: 12
    Last Post: 08-18-2011, 06:58 PM
  3. 1990 Corvette
    By maxepr1 in forum Click & Brag -The Detailers Showcase
    Replies: 1
    Last Post: 08-20-2010, 08:57 PM
  4. 1990 Corvette
    By muttgrunt in forum The Detailers Showcase
    Replies: 14
    Last Post: 08-20-2010, 04:05 PM
  5. Red 1990 ZR-1 Corvette
    By Rickrack in forum Click & Brag -The Detailers Showcase
    Replies: 19
    Last Post: 10-14-2005, 12:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •