Originally Posted by General Lee
I got my two bottles from Autopia Car Care last winter when they were clearing out all the 1Z stuff. Now you can still get them at http://www.drivewerks.com
Originally Posted by Hirosh
I tried using a 4" foam pad attached to a drill on the valve cover, and also tried a soft nylon brush, but both seemed to work WORSE than a terry towel by hand, and wasted a lot more product too. I`m almost done with the aluminum polishing, so I`ll just keep at it.
Originally Posted by Mark77
Check out this link for an explanation.
http://www.fk1usa.com/decontamination.htm
Originally Posted by JJ_
Yes I changed the oil yesterday, and I plan on changing the brake/clutch fluid as well as the transmission fluid, power steering fluid, and coolant. I was going to change the fuel filter but I guess it`s a non-serviceable type, probably located in the fuel pump.
I didn`t let the Woolite saturate at all really. I took a cheap MF towel and soaked it in a solution of Woolite and warm water. I wrang it out to the point that it was just a little wet, and rubbed that gently on the headliner. When it looked like the stain was all gone, I put the MF back in the bucket, and grabbed another MF towel for drying the area that I just cleaned. That`s it.
Bookmarks