I had a chance to use PB products last week, and really liked them. I used ssr2.5, PwC, and EX-P.
First, let me give some background on what I started with. My boss had to travel to NYC from Philly a few weeks ago and had to park under the train station. It rained, and A LOT of rail dust & unknown crud dripped on his car and produced nasty acid/etching marks over the entire car. When he returned from his trip a few days later he complained to the parking lot manager. The manager said this was a common problem and offered to clean it. They did, with toilet bowl cleaner + soft scrub, and nylon toilet bowl brushes. He about sh** his pants when they finished. He had TONS of scratches from the brushes + most of the spots didn`t lift. The week after that he had his driveway sealed. The folks that sealed the drive didn`t bother to close his garage door and the back 1/3 of his car got coated with driveway sealer overspray. I clayed the car (3 bars) which removed the sealer overspray and a lot of the rail dust goo. Next I applied SSR2.5 with a yellow edge 2000 pad (rotary on the tops & PC on the sides). I followed up with another coat of SSR2.5 with a blue edge 2000 pad. Then 1 coat of PwC with an edge 2000 blue pad via PC. I topped it with EX-P, using a black edge pad via PC. I removed about 95% of the defects. A few spots probably need to be wet sanded, compounded, polished, etc... but I didn`t have time (or the nerve) for that. Sorry about the night shots, but that`s the best I could do.
Bookmarks