RSX Exterior

**Greg Gellas** · 10-21-2009, 08:24 PM

I have been working on 16 BBS wheels from a race team recently and was contacted for work on an RSX...

Me and the fiance went Saturday to inspect the car and we discussed the job, exterior paint correction only, I got it dropped off today.

I called my buddy whom I have been "training" to use a PC to follow me after I use the rotary.

The car had swirls all over and lots of rids...I Soaked the car with the gilmore foam gun and let it sit...

I like toys

I dried it with some WW MF`s and pulled it in the clay. Standard Dirty clay shot...And I am still working on my picture taking, I have been using no flash and a flash shot to try to capture swirls and what not...I am learning slowly

Taped it all up and did a 50/50 on the roof to see what sort of correction I could get esp with the time I had. I have to work on my pics I know

**Greg Gellas** · 10-21-2009, 08:25 PM

Here is my little helper, following me on the DA...I went around with SIP on a wool pad, he followed with 203 on a white pad, I finished up with 106 on a white....After we were done polishing we brought it back out to wash off any dust. I followed up by Opti-seal and then Optimum car wax.

Here are the finals...Any trim was dressed with Opt Prtoection plus...

**JpiRally** · 10-21-2009, 08:38 PM

nice! what soap you using int he foam gun and what ratio? I can never get my gilmore to foam that much!..

joe

**imported_DJ Mayo** · 10-21-2009, 09:51 PM

Awesome work, Greg! Thanks for that link on that quick connect system

**Greg Gellas** · 10-21-2009, 10:37 PM

Originally Posted by Got_Leather

Awesome work, Greg! Thanks for that link on that quick connect system

.....:xyxthumbs Check PM....Further one coming in the AM

**imported_tpdetail** · 10-21-2009, 10:44 PM

Great rsx, I have an 04 Milano Red A spec. Btw, you forgot the wheel wells

**Greg Gellas** · 10-22-2009, 10:39 AM

Originally Posted by tpdetail

Great rsx, I have an 04 Milano Red A spec. Btw, you forgot the wheel wells

Nah, the customer only wanted the paint corrected, he didn`t even want the wheels cleaned...:wavey

**JpiRally** · 10-22-2009, 11:10 AM

what soap you using???? I didnt see it anywhere

thanks

joe

**ToadWart** · 10-22-2009, 11:18 AM

looks like optimum car wash :think:

**Greg Gellas** · 10-22-2009, 11:34 AM

Originally Posted by JpiRally

what soap you using???? I didnt see it anywhere

thanks

joe

Joe I used a mixture of Chemical Guys citrus wash and clear, and dawn 50/50 of each about 1/4 up the guns container then filled the rest with water to thin them out, set the gun on E and sprayed away :up