2006 Black Z06 Corvette

[gmblack3]

This one has just about 25k miles and is the clients 505hp daily driver for the last 2 years. The client is an avid zaino user and usually puts a coat of Z5pro or Clearseal/Z8 on every Sat. A little bonding in the garage is good for the soul and the finish of your car.



I started by foaming the car down with Z7 and my lance. I started washing with a sheepskin mitt using the 2BM and quickly noticed how slick the surface was. I must say this is the slickest paint that I have ever washed. After applying a fresh coat of zaino on our cars and washing them 7-10 days later, the surface is not quite this slick.



The wheels are always treated with some Z5pro or CS as well and where not that dirty. So a simple wash with Z7 carwash and a MF mitt was all that was needed. Wells and tires got cleaned with AM 777 APC 1:6 and a few brushes.



I then clayed the car with Zaino clay and Z6 as a lube while the car was still wet after the wash. I did not ask the client when was the last time he clayed the car, but this is how the claybar looked after claying the rear of the car. On just about every corvette I have detailed there is always plenty evidence of bonded contaminants from the rear of the car.







After removing the Z6 with a pakshak WW, I inspected the finish and found these defects:







I removed the defects with 2-3x and a few areas needed 4x of M105/edge yellow wool/1700.



I used a orange CCS 4" foam pad in the tighter areas w/ 70% M105 and 30% Presta 1500.



I then finished out with 3M ultrafina/ blue CCS pad/1700.



I washed the car with Z7 carwash to remove the polishing oils and dust.



I applied 2x of Z5pro followed by Z8.



Tires got Z-16.











One day I will learn how to use this Rebel Xt. ops:

[imported_JoshVette]

Bryan, that Z looks awesome now. Did you tell the guy that swirl removal would take off all those Zaino layers he`s been putting on?

[stilez]

Absolutely awesome.





I really love the Z06s. In black, a very hard car to beat.

[Way2SSlow]

Awesome Bryan! I`m glad to know that the car is well cared for. I want one so bad!





I think that would make a great COMPANY CAR for Peachstate Detail!

[Scottwax]

Outstanding as always, Bryan.



All you need to do it follow UF with a wash so Zaino will bond properly? I have 1 customer who requests Zaino and I just want to be sure that I can use UF to make sure his cars are swirl free before I put Z5 over them.

[gmblack3]

Bryan, that Z looks awesome now. Did you tell the guy that swirl removal would take off all those Zaino layers he`s been putting on?

Thanks Josh! Yes he was aware and is really to start layering again this w/e. :up

Absolutely awesome.





I really love the Z06s. In black, a very hard car to beat.

Thanks Sean! I agree that the black just looks evil.

Awesome Bryan! I`m glad to know that the car is well cared for. I want one so bad!





I think that would make a great COMPANY CAR for Peachstate Detail!

Thanks Wade!



Think it will pull a 6x12 trailer? :nixweiss

Outstanding as always, Bryan.



All you need to do it follow UF with a wash so Zaino will bond properly? I have 1 customer who requests Zaino and I just want to be sure that I can use UF to make sure his cars are swirl free before I put Z5 over them.

Thanks Scott! I use UF and zaino on 90% of the cars I detail. Plus I have used UF on our BMW. A good Z7 wash seems to work fine to remove the polishing oils from UF. You can always do a Z6 or 50/50 wipedown to ensure if you like.



When I foamed this black BMW after UF polishing with my lance and Z7, this is what it looked like before I used a sheepskin mitt:

[Rickrack]

Bryan,

Incredible work on one of my favorite cars!



I just finished detailing the same car yesterday



Nice work, looks great!

[Eisen Hulk]

Incredible!

[Clean Dean]

SWEEEEET !!!! Perfection !!!!

[.VorteX.]

Great work, and those pictures are awesome.

[ReLoaDeD BuLLiT]

Great work! I`d tone it down with the star photoshopping though

[Macruz19]

Always a great job Bryan!

[gmblack3]

Bryan,

Incredible work on one of my favorite cars!



I just finished detailing the same car yesterday



Nice work, looks great!

Thanks Rick! Can`t wait to see your results! How where the defects on the one you did?

Incredible!

Thanks Hulk!

SWEEEEET !!!! Perfection !!!!

Thanks Dean!

Great work, and those pictures are awesome.

Thanks VorteX!

Great work! I`d tone it down with the star photoshopping though

Thanks Bullit! Some of these pics have a tweek to them as they turned out dark, but that is the real sun. None of the "stars" or sun reflections are chopped in. I can email you the full size originals if you like. :up

Always a great job Bryan!

Thanks Macruz!

[ReLoaDeD BuLLiT]

how would you rate the 3m ultrafina against megs 82?

[Thomas Dekany]

Beautiful, beautiful, beautifu!!!!!!!