Pdr

[dimedrol]

I had my car dent PDRed it was on the door and pretty deep guy said that the bottom part will not come out perfect, i said ok. After he finished I paid and didn`t even looked (was busy is the house) ater i came out to see the dent, it was out but there are still couple of wavy dents they are not very deep, but when i look at them and move my head while looking at the dent i can see them.
? is PDR guy said that it is not possible to remove it. He worked in PDR for 14 years. So i guess he is good. So any of you do PDR, and what is your opinion.

[CharlesW]

Don`t do it.
Have had it done and it was not at all visible after the guy was finished. 4 dings in different areas. Not a trace.

Charles

[dimedrol]

Thanks CharlesW:


Here is the video

[kimwallace]

I do not do PDR but, Used to do body work in the past. I have had one of the best PDR guys I have seen do some work for me and most of the time you cannot tell where the dent was. What happens though on deeper dents is that usually the metal has been stretched and the PDR people cannot do much with that. Mant times the waves in the metal are a result of the stretching and the different stresses put into the metal.

[CharlesW]

Originally posted by CharlesW
Don`t do it.
Have had it done and it was not at all visible after the guy was finished. 4 dings in different areas. Not a trace.

Charles

:wait :wait
Stupid wording in this post!
I didn`t mean you shouldn`t do it, I meant I don`t do PDR.
My results were excellent.
Sorry if I caused some confusion.

Charles