Page 1 of 2 12 LastLast
Results 1 to 15 of 22
  1. #1

    Join Date
    Oct 2001
    Posts
    31
    Post Thanks / Like
    I used Xenit to clean some scuff marks off my interior panels. Do the chemicals in Xenit remove the plasticizers, and damage or reduce the life of the vinyl?

  2. #2

    Join Date
    Mar 2009
    Posts
    1,116
    Post Thanks / Like
    and as long as i dont press/rub to hard....and dont use too much product...it went fine....there was a time on my door sill that i was so intent on getting this cuff mark out that i used like 1/4 of the can and rubbed really hard...with an MF towel...the scuff came out but i started to see alittle abrasion on the sill...like it was coming up a little....too much macho!! ....anyway...wrote an email to Stoners asking them about it....lets see???

  3. #3

    Join Date
    Oct 2001
    Posts
    31
    Post Thanks / Like
    I had to do a good bit of rubbing to remove the scuff marks. Any idea what active chemicals are in Xenit?

  4. #4

    Join Date
    Mar 2009
    Posts
    1,116
    Post Thanks / Like
    citrus distillates and ISA....still no word back from the email isent them...

  5. #5

    Join Date
    Oct 2001
    Posts
    31
    Post Thanks / Like
    ISA?

  6. #6

    Join Date
    Mar 2009
    Posts
    1,116
    Post Thanks / Like
    isopropyl alcohol...sorry bout that...i used to hate when everybody did that to me...

  7. #7

    Join Date
    Mar 2009
    Posts
    1,116
    Post Thanks / Like
    Thanks for the inquiry - and I apologize for the late response - we had some

    e-mail problems. Xenit Citrus can be plastic-sensitive - it is a very

    strong product. Please read the can completely and always test first for

    compatibility and color-steadfastness. We also make some water-based

    cleaners that would be a bit safer for solvent sensitive materials. Thank

    you again and sincerely, Susan Burch



    really didnt answer my question about specific plasticizers...i guess you have to try it in a little place and find out for yourslef...

  8. #8

    Join Date
    Oct 2001
    Posts
    31
    Post Thanks / Like
    give any information that is not already on the label. Since we know it will damage some plastics the question becomes how do you tell if a material is vinyl or plastic. Sometimes it is easy, yet there are materials in my interior that I am not sure if they are vinyl or plastic.

  9. #9

    Join Date
    Mar 2009
    Posts
    1,116
    Post Thanks / Like
    im a little jealous of the Bimmer guys because it seems like they have alot of great sites with awesome info...very detailed about the exact make-up of almost evry part of the car.....that is very ncool....im sure somebody will post a `simple " etst for differentiating plastic/vinyl....

  10. #10

    Join Date
    Jun 2009
    Posts
    547
    Post Thanks / Like

    Corvette Hybrid - Check This Out

    Luster, I know you go to a lot of Vette shows and stuff, you ever see this guy? I believe it`s a mix of a 53 and a 03. I drove around it a few times, it`s just freaky looking, but the body lines are perfect, it`s goofy looking, but it`s VERY well done!









    2012 Acura TSX Special Edition, Crystal Black Pearl
    2007 Volvo XC90 Sport, Passion Red

  11. #11
    AMG Classic Car Detailing Old Pirate's Avatar
    Join Date
    Feb 2008
    Location
    Sunny Florida
    Posts
    11,199
    Post Thanks / Like
    I always seen them in white, first time in blue.
    AutopiaForums is the place to be.
    Remember to Shop Autopia-CarCare.com for your Detailing Needs!

  12. #12

    Join Date
    Aug 2006
    Location
    Indianapolis
    Posts
    2,068
    Post Thanks / Like
    The year I went to Barrett Jackson in West Palm, the manufacturer had a display and was taking orders.

  13. #13
    Harleyguy's Avatar
    Join Date
    Mar 2009
    Location
    South fla
    Posts
    432
    Post Thanks / Like
    We have a local Corvette store that sells them also.If your seating down they get close to 120 grand for them.
    Adam

  14. #14

    Join Date
    Jan 2010
    Posts
    247
    Post Thanks / Like
    Quote Originally Posted by Harleyguy View Post
    We have a local Corvette store that sells them also.If your seating down they get close to 120 grand for them.
    Gosh , I wonder what our vette guru will say about this car ? Bill , are you around Dude ? :biggrin:


    Steve.

  15. #15

    Join Date
    Mar 2009
    Posts
    742
    Post Thanks / Like
    i kinda like em but if i`m gonna dish out 120 g`s i`m gettin a zr1 and i`m a vette enthusiast...

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. P40 or Hybrid V7?
    By The Driver in forum Waxes, Sealants, and LSP's
    Replies: 20
    Last Post: 03-29-2014, 04:47 PM
  2. The NEWEST edition to the Hybrid Pads - The YELLOW Hybrid Pad
    By Todd@RUPES in forum Autopia-carcare.com
    Replies: 13
    Last Post: 10-17-2013, 03:10 PM
  3. Replies: 6
    Last Post: 05-16-2010, 07:16 PM
  4. Hybrid washing
    By CharlesW in forum Auto Detailing 101
    Replies: 2
    Last Post: 05-16-2009, 04:05 PM
  5. `76 Corvette Stingray & `00 Magnacharged Corvette `vert detail
    By 1 Clean WS6 in forum Click & Brag -The Detailers Showcase
    Replies: 22
    Last Post: 11-11-2005, 03:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •