Results 1 to 11 of 11
  1. #1

    Join Date
    Oct 2004
    Location
    Oxnard CA.
    Posts
    45
    Post Thanks / Like
    How often do you guys break out the PC on your own Daily drives. I polish mine about every eight to ten months. But I wax by hand about once a month.

    And also what products do you use????



    Thanks….BMG

  2. #2

    Join Date
    Sep 2002
    Location
    NE Ohio
    Posts
    86,984
    Post Thanks / Like
    Other than the occasional RIDS I don`t polish more than once a year, if that. But I redo the LSPs whenever I think it needs doing, or whenever I have the time/inclination. Products vary for LSPs depending on the vehicle, but I still do most of my polishing with 3M`s PI-III RC/MG.

  3. #3

    Join Date
    Sep 2005
    Posts
    2,565
    Post Thanks / Like
    I try not to properly polish by PC more than once a year, but I frequently crack it out to apply VM and RMG when I want to clean up the paint a little.

  4. #4

    Join Date
    Mar 2004
    Location
    Thousand Oaks, Ca
    Posts
    5,070
    Post Thanks / Like
    I`ll go with a polish and PC twice a year, and a paint cleaner and PC twice a year...Naturally a LSp follows......
    Owner of West Coast Detail Supply.

    Light travels faster then sound. This is why some people appear bright until you hear them speak.

  5. #5

    Join Date
    Oct 2003
    Location
    Charlotte, NC
    Posts
    213
    Post Thanks / Like
    Normally once per year, unless I need to work out a `small area problem`.



    I try not to polish needlessly, as:

    1) Paint is of finite thickness, and once it`s gone . . . it`s gone

    2) I`ve got better things to do with my Saturdays (kid`s little league does beat polishing)



    If you keep on top of things, little problems don`t turn into big problems, and once a year should be plenty.


    2000 Volvo S80</p>


    2006 Nissan Murano</p>


    2011 BMW 328i</p>


    2014 Mercedes E350

  6. #6
    Darth Camaro 12/27/15 Don's Avatar
    Join Date
    Dec 2002
    Location
    NE Ohio
    Posts
    2,466
    Post Thanks / Like
    Quote Originally Posted by Accumulator
    ...But I redo the LSPs whenever I think it needs doing, or whenever I have the time/inclination...


    I do about the same and I use the PC because of how even & thin the PC applies the sealant.



    **Edited to add: In fact, I just bought a can of NXT paste to try out & put 2 coats on a few hours ago, despite the fact that I just put a coat of NXT liquid & Collinite IW last week.
    Don M

    Proud owner of a 2017
    SUPERCHARGED
    Hyper-Blue Metallic 2LT 6/Manual
    Camaro


  7. #7

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    About 4 times a year since I bought the car, the paint was absolutely hideous and I didn`t have two full, uninterupted days to polish it out properly. Probably a couple more polishing sessions over the next 6 months and pretty much anything correctible will be. Getting the hood repainted, it was already repainted at some point and they didn`t lay the base coat down evenly. Light streaks the length of the hood under certain light. Ugh.
    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

  8. #8

    Join Date
    May 2004
    Location
    Haver-hill, MA
    Posts
    532
    Post Thanks / Like
    1-2x per year (w/ FPII), and trouble spots as they appear. I`ll clay and LSP about three times.

  9. #9
    Darth Camaro 12/27/15 Don's Avatar
    Join Date
    Dec 2002
    Location
    NE Ohio
    Posts
    2,466
    Post Thanks / Like
    Quote Originally Posted by Don M
    I do about the same and I use the PC because of how even & thin the PC applies the sealant.



    **Edited to add: In fact, I just bought a can of NXT paste to try out & put 2 coats on a few hours ago, despite the fact that I just put a coat of NXT liquid & Collinite IW last week.




    ...and yet a final (for this week anyway) coat this morning
    Don M

    Proud owner of a 2017
    SUPERCHARGED
    Hyper-Blue Metallic 2LT 6/Manual
    Camaro


  10. #10
    GTScott's Avatar
    Join Date
    Sep 2005
    Location
    Atlanta, GA
    Posts
    400
    Post Thanks / Like
    I have not had the PC for a full year, but I plan to polish twice a year. I do use it for reapplying my LSP and doing touchups every few weeks though. When my schedule gets busy I am sure I will do this less.



    -GT

  11. #11

    Join Date
    Jan 2004
    Location
    Stevens Point, WI
    Posts
    7,046
    Post Thanks / Like
    A few times a year I`ll pull out a cleaner like AIO or GEPC and use that with my PC. As far as an SMR step, once a year. Twice at most.
    Paul...

    `13 Mazda3i P21S/WG sealant/Paste Glaz/QD+
    `99 Mazda Protege LX - highlight silver - RIP
    `95 Nissan Maxima SE - white - slathered with Pinnacle Paste Glaz - RIP

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Very curious...
    By Go getta in forum Auto Detailing 101
    Replies: 4
    Last Post: 02-02-2011, 09:43 AM
  2. Just curious...
    By mrtonyn in forum Machine Polishing & Sanding
    Replies: 10
    Last Post: 04-02-2009, 09:10 PM
  3. curious now
    By scottabir in forum Machine Polishing & Sanding
    Replies: 8
    Last Post: 01-23-2006, 12:54 PM
  4. Just curious about UPP
    By Xec in forum Car Detailing
    Replies: 4
    Last Post: 12-31-2004, 07:54 AM
  5. Just Curious
    By ptim in forum Car Detailing
    Replies: 2
    Last Post: 02-18-2004, 11:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •