Time for a new LSP Combo... Help me decide!

[J.J.]

It`s time for a new combo on my Nissan`s (Black & Maroon). I`m trying to achieve slightly more durability with exceptional depth and clarity, so help me out with.



What I have available:

1. VM

2. RMG

3. SG

4. EX

5. Natty`s



I thought about trying VM --> RMG --> SG, but I`m not sure if these products are compatible. Whadaya` think?



JJ

[papi_jay]

I don`t thin kSG is compatible with anything at all except AIO .

Since your car is black the EX is a darn good sealant . 2+ months if heavy rains and such .



I would do this after polishing out the paint and cleaning it again .



1. RMG with buffer and finishing pad BUFF OFF COMPLETELY

2. EX + EX 24 hours later after a Poorboys ` QD+ wipe w/MF

3. 24 hours later after ex another QD+ wipedown - Carnuba Moose Wax - I dont know if your calling that VM - they have a Vanilla glaze which can polish out light swirls . If you have the glaze , use it before RMG with a blue pad or 2nd to last pad ..

4. Natty`s 1 or two coats

[imported_Picus]

I`d do the same thing papi recommended. Oh wait, I already did, that exact same lsp process (what a coincidence). Do it just like he said. RMG buffed off, EX w/carnauba followed by a second coat 24 hours later. CMW, 24 hours, Nattys. I love it. You can skip the CMW and go RMG/ex-p or ex w/carnauba/natty`s, but the CMW adds a lot of depth. The only difference was that I used Poorboys spray & gloss as a QD, not their QD+.

[Scottwax]

EX x 2 topped with Natty`s should be decently durable and give you good depth and wetness over proper prep.

[Richt]

RMG, EX and Nattys is well worth a try.

[J.J.]

Thanks fo rthe replies. Unfortunately, I don`t have the CMW. I have the Vanilla Moose Wax Hand Glaze (I think it`s been labeled "VM"), but I`m not really sure where or if it fits. I didn`t really want this stuff but was kinda` just stuck with it due to some bad timing. I would love to incorporate it somehow, so I guess I will try:

OP --> VM --> RMG --> EX x 2 --> Natty`s



I would also like some info on this VM and how I can get the most out of it.



I wasn`t aware you could layer EX. Good tip! I would also like to try some EX-P but I don`t have any. ANyone want to do some trading?



Thanks for the suggestions!

JJ

[Richt]

OP --> VM --> RMG --> EX x 2 --> Natty`s



Will be a very good combo. I find VM cleans up the paint really well with a polishing pad on the PC, goes on and off wet. Follow that up with RMG and a finsihing pad and it will look great ready for sealant and wax.

[J.J.]

Awesome, thanks Rich



JJ

[wannafbody]

RMG/ Mothers Reflections Top Coat

RMG/PinkWax

[imported_SilverStallion]

Does EX and EXP dry clear or white? I was curious how this will look on a black car with stone chips. I was thinking about this combo for black and dark Mystic Blue.



Thanks.

~Darren

[J.J.]

I finally went with the following on the Maroon B14:

1. OP orange pad followed by green pad

2. VM green pad

3. RMG black pad

4. EX blue pad

5. Natty`s by Hand



It is very impressive if i do say so myself. I wish I could post pics but my DA** camera died! Now I have to scrape some money together for a new camera. Da**it!



JJ

[Richt]

Glad it turned out nice, sorry about the camera.