Results 1 to 7 of 7
  1. #1

    Join Date
    Nov 2004
    Posts
    3
    Post Thanks / Like
    I just got my car back from the body shop about 1 week ago. The area where they painted has a lot of swirls they didnt do a good job buffing. I was wondering would it be safe for me to use #83 DACP on it? Or should I just use #80 Speed Glaze. What kind of swirls can #80 tackle (light, moderate, heavy). Pictures of examples would be nice. Thank you.

  2. #2

    Join Date
    Jan 2011
    Posts
    200
    Post Thanks / Like
    you need to wait till the paint cures. By that I mean there is a certain amount of VOC in the paint and they need to evaporate before any barrier goes on or the paint can `pop` which is micromarring or small bubbles form in the paint. Wait a month before doing anything

  3. #3

    Join Date
    Mar 2003
    Location
    sf bay area
    Posts
    712
    Post Thanks / Like
    I think the #80+ series are bodyshop safe?

  4. #4

    Join Date
    Sep 2002
    Location
    NE Ohio
    Posts
    86,984
    Post Thanks / Like
    I`ve polished fresh paint many times, and the shops I patronize have often polished it (perhaps even wetsanded it) before that.



    The important thing is to only use "bodyshop safe" products that won`t interfere with the outgassing/curing.



    As far as I know, Meg`s "80s series" polishes are all bodyshop safe. I also use 3M`s PI-III RC (05933) and MG (05937) on fresh paint, as well as Menzerna.



    If using Megiuar`s stuff, I`d generally stick with #80 (instead of trying the #83), as fresh paint is softer than usual (gets harder as it cures). Even #80 will sometime (micro)mar fresh paint, requiring a follow-up with a milder polish. Had that happen just this last autumn.



    No pics, but #80 will usually remove light to moderate marring. It would be an OK product to start with in your situation- what you`re dealing with is pretty much what #80 was designed for. But just to be safe, I`d try a small spot (before doing an entire panel) in case the paint is *very* soft.

  5. #5

    Join Date
    Nov 2004
    Posts
    3
    Post Thanks / Like
    Thank you for your post. I think I will go with the #80. I asked the body shop if I can buff out the swirls myself and they were like why we used a "swirl free" pad already. Blah. I don`t know how a body shop can do so bad, a factory Toyota one in fact. Sucks. Oh well.

  6. #6

    Join Date
    Dec 2004
    Posts
    106
    Post Thanks / Like
    einszet make a great line of polishes

  7. #7

    Join Date
    Sep 2002
    Location
    NE Ohio
    Posts
    86,984
    Post Thanks / Like
    Originally posted by fertzguy

    einszet make a great line of polishes


    Yeah, but most of the 1Z polishes that we talk about here contain waxes (not good for fresh paint). They *do* make a bodyshop-safe line but those products are hard to find.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wet-sanding - Fresh Paint vs Factory Paint
    By Mike Phillips in forum The Detail Institute presented by Autopia-carcare.com
    Replies: 8
    Last Post: 08-26-2010, 07:19 PM
  2. Fresh paint more prone to swirls than factory paint?
    By MnRiverman in forum Car Detailing
    Replies: 4
    Last Post: 11-15-2003, 10:07 AM
  3. Best way to apply Meg`s #9 for heavily swirled paint?
    By imported_IronChef in forum Car Detailing
    Replies: 2
    Last Post: 08-19-2003, 01:07 AM
  4. Clay scratched/swirled my paint!
    By Warez in forum Car Detailing
    Replies: 12
    Last Post: 12-29-2002, 05:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •