Been wondering this since I learned about decon products.
If I decon a car, does this process make claying unnecessary?
Sent from my iPhone using Tapatalk
Been wondering this since I learned about decon products.
If I decon a car, does this process make claying unnecessary?
Sent from my iPhone using Tapatalk
Post Thanks / Like - 0 Likes, 1 Thanks, 0 DislikesRockysdetailing thanked for this post
I still clay. Takes a short time, and I get familiar with the paint.......
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!Post Thanks / Like - 4 Likes, 1 Thanks, 0 DislikesStokdgs thanked for this post
I’ve used both but for the most part I clay. I work on so few cars and just about everything I work on is something I keep up on a regular basis. I’ve used decon products on brand new vehicles to get them started right first thing out of the gate.
A society willing to trade liberty for temporary security deserves neither and will lose both
ΜΟΛΩΝ ΛΑΒΕ
I`ll spray the ironx type product first but usually still clay. The iron removers make claying a bit easier. I usually use a nanoskin, instead of clay anymore. Less fussy.
Correction........
I iron-x or similar, then clay
+1 with the combo above. Chemical decon first and then clay
Learning tips and tricks from fellow board members since 2009Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesStokdgs liked this post
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesStokdgs liked this post
Okay so If one clays- it eliminates the need for a decon?
Sent from my iPhone using Tapatalk
A society willing to trade liberty for temporary security deserves neither and will lose both
ΜΟΛΩΝ ΛΑΒΕ
Both. The iron x makes claying much easier and faster.
I decon wash with a tar remover and an alkaline product and last a iron remover. If the paint feels rough and has contaminants left I clay. Then the claying is easier to do and if I decon wash sometimes it take longer apart to have to clay.
Detailing story goes something like this: 3 kinds of stuff on paint - 1) loosely bonded contaminants (dirt), 2) bonded contaminants (sap, overspray, etc.) and 3) embedded contaminants (iron melted into the clear coat). 1) is eliminated by normal washing. 2) is removed by clay. 3) requires the decon products that dissolve and/or push out the iron from the paint. Clay would (theoretically) just shear off the particle above the paint line while leaving the subsurface piece to do bad things to your clear coat.
Not sure I completely buy this but I generally decon and clay - especially before I coat a car.
Post Thanks / Like - 1 Likes, 1 Thanks, 0 Dislikesnickclark08 liked this postMary B thanked for this post
If you want to do the job right, decon and then clay is the way to go. Decon gets the paint clean, clay gets the paint smooth.
Can someone talk to me about these mits that replace claying?
What’s the deal what are they and how long do they last these Nano skins.
Sent from my iPhone using Tapatalk
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks