So that is the correct process: rinse off, foam cannon let sit, rinse off foam then mitt wash and soap, two bucket method, electric air blower dry...
The problem is there is no correct things when it`s comes to methods. Just what you prefer and find out what works for you. And what benefits you get from the different ones or what the downside is.
From what I have experienced with the part of pre-rinse and foam and rinse or foam on dry paint then rinse. Is when I foam on dry paint I get a longer dwelling time. This get the benefit that it`s takes longer to dry on the paint which I don`t want to happens. And I get the possibility to clean with the water pressure from the PW when I start from the bottom and work my way up. The not visual benefit is that the foam capsulate the dirt and get some lubrication when it`s rinsed off. Or at least I think so lol. The cleaning ability between dry foam it and prerinsed IME is that the dry foam catch up cause of the longer dwelling time. This is when useing the same kind of foam. It`s cleaning ability is from what product you use when foaming. And the benefit on very dirty car the use of a dedicated prewash foam is important. Now I have access to a little larger offerings of prewash foams. But Gyeon Foam or gtechnic w4 citrus foam or Angelwax Fastfoam or Angelwax Cleanliness good ones. So with maintance washes I always starting with prewash foam on a dry car. When doing decon washes I have a different approach.
And don`t forget to clay!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks