Page 1 of 3 123 LastLast
Results 1 to 15 of 31
  1. #1
    Forza Auto Salon David Fermani's Avatar
    Join Date
    Aug 2004
    Location
    Troy, MI
    Posts
    12,534
    Post Thanks / Like
    I recently was given this tip from a very reputable Detailer and he swears by how effective it is at cleaning nastly silicone covered tires. You know the ones that you can scrub and scrub with the strongest APC and still have greasy slim remaining. You basically spray a crappy towel down with the cleaner and it instantly wipes away the built up crud. Cheaper the better.



    Anyone ever try this??
    Metro Detroit`s leader in cleaning, preserving & perfecting fine automobiles!

  2. #2

    Join Date
    Jan 2002
    Location
    Atlanta, GA
    Posts
    8,402
    Post Thanks / Like
    No, I have not. IMO I dont think that repeated use is good for the tires.
    Bryan Burnworth - Atlanta Car Detailing - Peachstate Detail LLC

    Selected as one of the top nine detailers in the US by Autoweek

    Published in the 356 Registry

    The only exclusive Opti-Coat Pro specialist in Atlanta

    All PPF work done by the best in Atlanta Derek Johnson of Atlanta Protective Films

    Follow Peachstate Detail LLC on Facebook here.

  3. #3
    CCH Auto Appearance, LLC C. Charles Hahn's Avatar
    Join Date
    Jul 2003
    Location
    Lansing, MI USA
    Posts
    8,783
    Post Thanks / Like
    I can`t help but wonder what effect the solvents would have on the rubber compound....
    Charlie
    Automotive Appearance Specialist - Serving Greater Lansing, Michigan
    http://www.cchautoappearance.com/

  4. #4

    Join Date
    Dec 2008
    Posts
    257
    Post Thanks / Like
    Quote Originally Posted by David Fermani
    I recently was given this tip from a very reputable Detailer and he swears by how effective it is at cleaning nastly silicone covered tires. You know the ones that you can scrub and scrub with the strongest APC and still have greasy slim remaining. You basically spray a crappy towel down with the cleaner and it instantly wipes away the built up crud. Cheaper the better.



    Anyone ever try this??


    I`ve done this when i was at a dealer as a tech. If I had to replace tires or install mud guards, I didn`t want to get tire shine all over me. I`ve never done it in a detailing scenario.



    It works. Spray liberally, wipe with a shop towel, all done. It turns the tire brown a little bit.

  5. #5

    Join Date
    Mar 2001
    Location
    Keokuk, Iowa
    Posts
    3,436
    Post Thanks / Like
    Oh my God!

    Does anyone actually know the chemical composition of a modern tire and it`s side walls?

    The manufacturers puts anti-UV waxes in the rubber, there is carbon black for heat absorpsion, etc.

    Oily silicone dressing do provide a "getto shine" to a tire, but as all the major tire manufacturers state, "don`t use them, they break down the side wall of the tire!" (some even put a disclaimer in their tire warranty regarding the use of such dressings)

    That said, when you spray a "clorinated solvent" to the tire, you remove even faster these components and in time in time, a couple of things happen.

    1. As soon as you do clean with brake cleaner, you do observe the "browning", which means that the carbon black and anti-UV protective waxes have been somewhat removed. (early side wall failure)

    2. The removal of these components will normally cause the tire sidewall to exhibit a "brown" color.

    It is not SAFE, it is not right, it is as wrong for the tire as using a "silcone fluid based dressing with a hydrocarbon solvent for it`s carrier".

    If the tire is as bad as to have a build up of the silicone, and you attempt or actually remove it, you are just taking off those important tire components as the silicone/dimethal did when they attacked the side wall by using a clorinated or highly active solvent.

    A pro shop has to deal with this sort of issue and once out the door, out of mind.

    However, for an individual`s vehicle, don`t do it.

    Take your time, use a safe water borne cleaner (APC) and scub it, drive it and more of the dimethal silicone will migrate out of the sidewall, and you can clean it again.

    After some time, it is gone and you still have some sidewall with what the tire manufacturer put there for a reason.

    The flexing of the sidewall is meant to "migrate" the waxes and carbon black to the surface.

    Every notice that after a long 100 mile or so run in hot weather that you see, no matter if you use a correct water based amino functional siloxane resin dressing, that the side wall may look shiney and be "tacky" to the touch?

    That is the result of the heat flexing of the side wall, moving the anti-UV protective wax and carbon black to the outer layer of the side wall.

    It is designed to do that!

    When a vehicle sets, the sun hits it, it eats away these protective components, designed to do so.

    Ever notice that RV`s etc that set for a long time usually have covers on the tires?

    The sun and it`s UV`s will eat away the protective components since the RV is not being driven, creating the flexing and migration from inside the sidewall to the surface, so they have learned to keep the UV`s away from the tires.

    Long winded and I could go on, but just read and "think" before taking an action that may end up costing you a lot of money and compromise your safety.

    Grumpy

  6. #6

    Join Date
    Apr 2009
    Location
    Fort Leavenworth KS
    Posts
    643
    Post Thanks / Like
    @Ron Ketcham: so you`re not supposed to do anything with tires but clean them regularly within an APC?

  7. #7

    Join Date
    Mar 2001
    Location
    Keokuk, Iowa
    Posts
    3,436
    Post Thanks / Like
    Nothing wrong with using a aminofunctional siloxane water based dressing on them.

    That sort of product, which now days, most companies make is actually non-damaging and helps to ward off the damaging UV rays, without removing the waxes and carbon black from the tire`s sidewalls.

    Grumpy

  8. #8
    CCH Auto Appearance, LLC C. Charles Hahn's Avatar
    Join Date
    Jul 2003
    Location
    Lansing, MI USA
    Posts
    8,783
    Post Thanks / Like
    Quote Originally Posted by Ron Ketcham
    "clorinated solvent"


    What about non-chlorinated brake cleaner?



    Charlie
    Automotive Appearance Specialist - Serving Greater Lansing, Michigan
    http://www.cchautoappearance.com/

  9. #9

    Join Date
    Mar 2001
    Location
    Keokuk, Iowa
    Posts
    3,436
    Post Thanks / Like
    Is it a hydrocarbon based cleaner?

    Yes it is.

    And what does any hydrocarbon based/petroluem distillate solvent do as far as reaction with such components that are in a tire?

    Your turn.

    Grumpy

  10. #10
    CCH Auto Appearance, LLC C. Charles Hahn's Avatar
    Join Date
    Jul 2003
    Location
    Lansing, MI USA
    Posts
    8,783
    Post Thanks / Like
    Quote Originally Posted by Ron Ketcham
    Is it a hydrocarbon based cleaner?

    Yes it is.

    And what does any hydrocarbon based/petroluem distillate solvent do as far as reaction with such components that are in a tire?

    Your turn.

    Grumpy


    That`s what I figured based on what you said, but since you specified "chlorinated solvent" I thought I`d bring it up anyway.



    (or to quote your buddy Dave Hester, "YUUUP!!")
    Charlie
    Automotive Appearance Specialist - Serving Greater Lansing, Michigan
    http://www.cchautoappearance.com/

  11. #11

    Join Date
    Mar 2001
    Location
    Keokuk, Iowa
    Posts
    3,436
    Post Thanks / Like
    Clorinated are a high VOC, very "active" family of solvents.

    These sort of "solvents" are no longer available without special permits in many states due to their VOC content.

    I can buy products that contain clorinated solvents in Iowa, but not in states like California and I think 14 or 15 other states.

    Matter of fact, bought an aerosol carb cleaner today at AutoZone that says right on the label "containes clorinated solvents", as I finally pulled the carb of my 1975 Ranchero so I can rebuild it with new floats, and other parts.

    I have a gallon of xylene, which would have done pretty good (carcenigenic), some acetone, MEK, etc, just decided to go with a chemical compound that is for one thing, soaking and cleaning carb`s.

    It needs it, only 76,000 miles on the Beast, but a long time, many years.

    The plastic floats are toast, so you know what that causes.

    Grumpy

  12. #12

    Join Date
    Dec 2008
    Posts
    257
    Post Thanks / Like
    Quote Originally Posted by Ron Ketcham
    Oh my God!

    Does anyone actually know the chemical composition of a modern tire and it`s side walls?

    The manufacturers puts anti-UV waxes in the rubber, there is carbon black for heat absorpsion, etc.

    Oily silicone dressing do provide a "getto shine" to a tire, but as all the major tire manufacturers state, "don`t use them, they break down the side wall of the tire!" (some even put a disclaimer in their tire warranty regarding the use of such dressings)

    That said, when you spray a "clorinated solvent" to the tire, you remove even faster these components and in time in time, a couple of things happen.

    1. As soon as you do clean with brake cleaner, you do observe the "browning", which means that the carbon black and anti-UV protective waxes have been somewhat removed. (early side wall failure)

    2. The removal of these components will normally cause the tire sidewall to exhibit a "brown" color.

    It is not SAFE, it is not right, it is as wrong for the tire as using a "silcone fluid based dressing with a hydrocarbon solvent for it`s carrier".

    If the tire is as bad as to have a build up of the silicone, and you attempt or actually remove it, you are just taking off those important tire components as the silicone/dimethal did when they attacked the side wall by using a clorinated or highly active solvent.

    A pro shop has to deal with this sort of issue and once out the door, out of mind.

    However, for an individual`s vehicle, don`t do it.

    Take your time, use a safe water borne cleaner (APC) and scub it, drive it and more of the dimethal silicone will migrate out of the sidewall, and you can clean it again.

    After some time, it is gone and you still have some sidewall with what the tire manufacturer put there for a reason.

    The flexing of the sidewall is meant to "migrate" the waxes and carbon black to the surface.

    Every notice that after a long 100 mile or so run in hot weather that you see, no matter if you use a correct water based amino functional siloxane resin dressing, that the side wall may look shiney and be "tacky" to the touch?

    That is the result of the heat flexing of the side wall, moving the anti-UV protective wax and carbon black to the outer layer of the side wall.

    It is designed to do that!

    When a vehicle sets, the sun hits it, it eats away these protective components, designed to do so.

    Ever notice that RV`s etc that set for a long time usually have covers on the tires?

    The sun and it`s UV`s will eat away the protective components since the RV is not being driven, creating the flexing and migration from inside the sidewall to the surface, so they have learned to keep the UV`s away from the tires.

    Long winded and I could go on, but just read and "think" before taking an action that may end up costing you a lot of money and compromise your safety.

    Grumpy


    Oops. Haha



    You probably wont find a flat rate tech who will take their time.



    Good thing the majority of tires i used brake clean on were getting replaced.

  13. #13

    Join Date
    Mar 2001
    Location
    Keokuk, Iowa
    Posts
    3,436
    Post Thanks / Like
    As I said, if you are a volume shop, got to get it out and over the curb, please some suit at a car lot, do what it takes.

    If it one`s on car, hope those who read get some factual information regarding this concern.

    Anyone can access tire manufacturers, etc and find that what I posted is the real world regarding tires today.

    And, you don`t even want to know what I did to tires when I was playing with cars, detailing, etc in the late 50`s and early 60`s.

    Not ashamed, didn`t know any better.

    Grumpy

  14. #14
    salty's Avatar
    Join Date
    Dec 2009
    Posts
    2,207
    Post Thanks / Like
    Same reason as using IPA on trim and wipers. It eats a layer of rubber. Not as serious as tires failure.



    I have used Mineral Spirits to clean auction cars that strong APC would not touch. Wet tire, spray APC and then some Mineral Spirits. A scrub and feel the rubber being softened. Not good. Defiantly a last resort.

  15. #15

    Join Date
    Dec 2008
    Posts
    257
    Post Thanks / Like
    Quote Originally Posted by salty
    Same reason as using IPA on trim and wipers. It eats a layer of rubber. Not as serious as tires failure.



    I have used Mineral Spirits to clean auction cars that strong APC would not touch. Wet tire, spray APC and then some Mineral Spirits. A scrub and feel the rubber being softened. Not good. Defiantly a last resort.


    I have used IPA on many cars` wiper blades includibg mine. My original wipers lasted 3 years before they started to streak. Im on my 2nd set and they are on their 3rd year now.



    I guess eating a layer of rubber is probably why it stops them from streaking... Like polishing paint, levels the surface

 

 
Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Other Uses for Brake Clean
    By GearHead_1 in forum Hot Tub
    Replies: 2
    Last Post: 02-28-2009, 12:06 PM
  2. Tires dressing and brake squeal?
    By PhaRO in forum Start your own auto detailing business
    Replies: 7
    Last Post: 03-16-2006, 07:20 PM
  3. How to clean brake calipers and hubs?
    By globemast in forum Car Detailing
    Replies: 5
    Last Post: 08-02-2005, 02:17 PM
  4. Dressing tires with brake fluid
    By imported_pdsterns in forum Car Detailing
    Replies: 28
    Last Post: 07-23-2005, 04:24 PM
  5. Can AIO be used to clean brake dust?
    By Elbow Grease in forum Car Detailing
    Replies: 8
    Last Post: 01-01-1970, 12:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •