I am curious as to what you guys prefer for this product. Do you use a rotary or a PC? What pads do you find to see the best results from? And how long do you see this product protecting and lasting for? Thank you in advance!:heelclick
I am curious as to what you guys prefer for this product. Do you use a rotary or a PC? What pads do you find to see the best results from? And how long do you see this product protecting and lasting for? Thank you in advance!:heelclick
My profession and obsession
I use a white polishing pad with Poli-Seal applied with either the Flex or PC, I don`t own a rotary.
I don`t find the durability of Poli-Seal to be very good. I usually remove it with Aquawax to aid with its durability.
Thank you for the input!
My profession and obsession
By PC (which is what I usually use) with a Meguiars yellow polishing pad. By rotary, I use it with a blue Soft Edge polishing pad (which is softer than most polishing pads) and have no issues with holograms appearning, even months after application.
Poli-Seal will last around 90 days or so (depending on enviromental conditions, wash method, etc) but you can add another month or so by removing it with Optimum Car Wax.
I use it with a Cyclo+green Edge pads, remove with OCW. Works great, at least on a relatively swirl free car. I wax at least every 2 months so durability is no problem. Maintain it with OCW now and then and you can probably keep it nice for 6 months.
Edge Polishing Pad/rotary
3M finishing pad/rotary is my fav (also for D151, works awsome)
Polishing Pad/PC
I dont really trust any AIO as for long term protection so I usualy top it but I can tell you that the 2 months I had Poli-Seal only it seemed to hold up well.
Quality Doesn`t Cost, It Pay`s
I`ve applied it with my PC and my rotary.
With my PC I`ve used an orange LC pad, and white LC pads. I typically work it like I would a polish on PC at speeds 5-6. I`d much rather use the white pad than orange, but it looked like I got more correction (possibly filling...not really sure..no stripping wipedown as it was a one step) with the orange.
With my rotary, I`ve applied it with a blue Edge Polishing pad and a white Edge finishing pad. I usually keep the speed down around 1000, but I think I`ve bumped up to about 1200. I`d definitely recommend that you get a feel for the product with the PC first, because you cant really see it on the finish as well as with other polishes.
I`ve never left it alone on a car. I spritz a little OCW onto the panel as I remove the PS. I`m wiping it down anyway, so the OCW doesnt add any more time to the process, and it should give you some extra protection.
~werd to yo mutha~
Wade
White or Green LC pad on a PC, remove with OCW
Orange light cutting or white plosihing pad via pc for my customers. Orange for more correction/oxidation removal and white for paints in great condition. Orange pads will cause micromarring on softer paints though. I`ve never used it with a rotary (yet).
I`m actually walking away from poliseal and towards XMT 360. It`s durability is just shy of poliseal, but offers more correction and less work time.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks