Big detail with Water Etching

[SVTsupremecy]

Ok so ive started THE detail on my car. Ive clayed it and started to polish it with Menz SIP with CCS 6" orange pad. The scratches are 98% gone, however on the parts i polished there are still little water etching marks. After polishing im going to Danase Wet Glaze and Duragloss 101+105 it, but im not sure if i should move on since i want the etching gone. any suggestions?



so far im thinking after polishing i should Duragloss 101 and 105 the car. then Danase wet glaze it and add another DG 105. Initially i was thinking i was going to DWG before i used DG 101+105. My thinking is that 101 will remove the etching since its kind of an All in one, correct?

[mnguyen110]

If SIP did not remove the etching then 101 will not. Might want to try a more agressive compound, rotory, or wetsand.

[SVTsupremecy]

Looks like im gonna have to clearkote compound the roof hood and trunk...my cars in worse shape then i thought. Before & afters are coming.