Page 1 of 2 12 LastLast
Results 1 to 15 of 27
  1. #1

    Join Date
    Jun 2007
    Posts
    35
    Post Thanks / Like
    Well i have a range rover and i find that a wash and wax takes me at least a couple of hours. Is this normal. I can wash and wax my sisters Z3 in less then a third of the time. Since my car is so large i have to wash it in sections which takes forever. Does anyone have any recomendations.



    Also i really want to clay my car but i think that might add a few more hours onto the already long process.

  2. #2

    Join Date
    Aug 2006
    Posts
    1,989
    Post Thanks / Like
    Yes, detailing is a long process

  3. #3

    Join Date
    Dec 2009
    Posts
    1,141
    Post Thanks / Like
    As Coupe said, its a long process. A properly washed vehicle really stands out though!



    When I do my parents` Odyssey (a year old today, still hasn`t been waxed...yes I know its not good :p), it takes me 1 hour and 45 minutes to...



    Rinse

    Pretreat with Citrus Degreaser

    Wash with double bucket method and sheepskin wool mitt

    Clean rims, tires

    Rinse

    Dry



    Washing should be done in sections. Don`t feel like you have to speed up yourself when washing and drying, this is where most of your swirls can happen. Taking your time ensures you`re doing everything properly.

  4. #4

    Join Date
    Apr 2007
    Location
    Fox Valley, WI
    Posts
    1,160
    Post Thanks / Like
    If you have a good wash soap and water/soap mixture you can clay as you wash using the suds as lubrication. Saves lots of time especially on larger vehicles.
    - Todd Schmidt -

    Auto Reconditioning Specialist

    and Master of Shine



    TS Detailing

    Wisconsin`s Premier Mobile Detailing Specialist

  5. #5

    Join Date
    Dec 2009
    Posts
    1,141
    Post Thanks / Like
    claying as you wash?

    wouldn`t that increase the chance of induced marring because the dirt and grit are still on the paint?

    or do you mean wash, then wash again and use the suds as a lube to clay.

  6. #6

    Join Date
    Sep 2002
    Location
    NE Ohio
    Posts
    86,984
    Post Thanks / Like
    Quote Originally Posted by kaval
    claying as you wash?

    wouldn`t that increase the chance of induced marring because the dirt and grit are still on the paint?

    or do you mean wash, then wash again and use the suds as a lube to clay.


    Yeah, you wash/rinse until the panel in question is clean, clay/rewash/rerinse and then move on to the next panel.



    On the time that it takes: I work quickly, so fast that it`s very demanding (and I`m in shape This is as tough as a good run..) and it still takes me well over an hour to wash *anything*. I generally set aside a good three hours for a regular wash of a normal vehicle, and if I finish a little early, well, that`s OK too.

  7. #7

    Join Date
    Sep 2007
    Location
    Louisville KY
    Posts
    580
    Post Thanks / Like
    Quote Originally Posted by todd@bsaw
    If you have a good wash soap and water/soap mixture you can clay as you wash using the suds as lubrication. Saves lots of time especially on larger vehicles.
    The new clay sponge that has been floating around for a few months is great for the clay/wash process plus if you drop it, you can rinse it off

  8. #8

    Join Date
    Apr 2007
    Location
    Fox Valley, WI
    Posts
    1,160
    Post Thanks / Like
    Quote Originally Posted by imageautodetail
    The new clay sponge that has been floating around for a few months is great for the clay/wash process plus if you drop it, you can rinse it off
    Haven`t seen that yet. I`ll have to check it out.
    - Todd Schmidt -

    Auto Reconditioning Specialist

    and Master of Shine



    TS Detailing

    Wisconsin`s Premier Mobile Detailing Specialist

  9. #9

    Join Date
    Sep 2007
    Location
    Louisville KY
    Posts
    580
    Post Thanks / Like
    ill pm you a link

  10. #10

    Join Date
    Mar 2007
    Posts
    380
    Post Thanks / Like
    It takes me close to 2 hours to wash/dry my e46 sedan. But that`s with setup/cleanup, cleaning all door/trunk jams, dressing tires and cleaning outside windows. Takes more time if i want to qd it too. But i truly enjoy taking care of my car. It`s almost therapeutic for me Haven`t really found a reason to refine my process to make it more time efficient.

  11. #11

    Join Date
    Oct 2001
    Location
    Arlington, TX
    Posts
    34,077
    Post Thanks / Like
    Optimum No Rinse (ONR) is a real time saver when it comes to washing since you wash and dry at the time, panel by panel and only go around the car once during the wash/dry process.
    www.scottwax.com

    Certified Opti-Coat Pro/Pro 3 installer

  12. #12

    Join Date
    Sep 2004
    Location
    Royal Oak, MI
    Posts
    339
    Post Thanks / Like
    2 and 3 hours to wash a car?

    I get home from work @ 6 the sun is setting @ around 7:50 these days.

    It takes me an hour to wash the car tops... wheels, jambs, dress tires, and QD/AW.



    I do it 2x a week...
    ...BlackSheepSquad...

  13. #13

    Join Date
    Sep 2002
    Location
    NE Ohio
    Posts
    86,984
    Post Thanks / Like
    Quote Originally Posted by Accumulator
    ...it still takes me well over an hour to wash *anything*. I generally set aside a good three hours for a regular wash of a normal vehicle, and if I finish a little early, well, that`s OK too.


    Quote Originally Posted by violentveedub
    2 and 3 hours to wash a car?




    [shrug]...some vehicles just take longer than others :nixweiss Two very different examples that I deal with almost weekly: the Audis are examples of our "normal" vehicles, the Blazer is the daily dog-hauler that gets very dirty.



    No matter how fast I move, I can`t get the A8/S8`s wheels/wells/undercarriage done in less than 30 minutes, even using two floorjacks. And the engine compartments take a while due to the cladding I have to R&R and the hard-to-clean areas that are under it. Oddly enough, the actual "regular" washing/drying of the body, even with my foamgun/etc. wash techniques, doesn`t contribute all that much to how long things take, and jambs go quickly with BHBs. Goodness knows I *try* to wash fast....



    The Blazer washes up pretty quickly (no need to raise it up to do the undercarriage/wells good enough for a quick wash), but I end up blowing water out of nooks and crannies for a long time..it just keeps coming and I get spotting if I just let it happen. But if I don`t need to drive it (and if I don`t worry about rusting :think: hey, I`m selling it anyhow...) I can just let it sit inside and drain, and then clean up the spots with QD after a day or two. The engine compartment takes a little while, but generally, even *I* can wash that vehicle fast if I don`t worry about those drips And no, I can`t ONR it or I`d never get the dirt out of those out-of-the-way areas that contribute to the dripping.



    Heh heh, I still haven`t figured out how to wash that (metallic black) Yukon XL quickly...lots of vehicle there; I`m on/off the work platforms repeatedly (and constantly moving them) just doing the roof, it`s like some aerobics class step-workout And it`s supposed to replace the Blazer as our dog-hauler :nervous:

  14. #14

    Join Date
    Sep 2004
    Location
    Royal Oak, MI
    Posts
    339
    Post Thanks / Like
    You jack up the car every time?! I guess neither of those land yacht`s have the air suspension?



    Wow, I thought for a minute there A8 vs. VW Rabbit(me), sure... ok; it will take longer so you aren`t as crazy as I thought. Then you self-disclosed a little more and boom... You must have a very understanding home life, my wife would kill me if I did that every wash. Most folks look at me funny b/c I take the wheels off once a MONTH and clean up back there.



    P.s. If you lower the car and put bigger wheels on it... you can`t see the wheel wells much any more!





    Note the A8 wheels, when my car grows up, it wants to be like yours...
    ...BlackSheepSquad...

  15. #15

    Join Date
    Jan 2008
    Posts
    1,911
    Post Thanks / Like
    Quote Originally Posted by imageautodetail
    The new clay sponge that has been floating around for a few months is great for the clay/wash process plus if you drop it, you can rinse it off


    Do you feel the sponges do as good of a job as clay?



    Also, do sponges come in untra fine, fine, medium etc. like clay does?

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Water takes long to dry off paint
    By gcee in forum Car Detailing
    Replies: 3
    Last Post: 08-03-2011, 05:56 PM
  2. What takes off paint?
    By dogma in forum Car Detailing Product Discussion
    Replies: 1
    Last Post: 07-03-2006, 09:06 AM
  3. Looks like my niece takes after her Dad
    By Scottwax in forum Hot Tub
    Replies: 1
    Last Post: 03-08-2005, 05:09 AM
  4. A man takes his Rottweiler to the vet...
    By JustinR32 in forum Hot Tub
    Replies: 9
    Last Post: 02-08-2005, 06:36 AM
  5. What takes off what?
    By copo69 in forum Car Detailing
    Replies: 9
    Last Post: 01-01-1970, 12:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •