Questions on PC pad/product use

[imported_arenner80]

Thank you everyone for introducing me to a new world of perfection for my already near perfect soon to be perfect vehicle.



My problem is moderate swirling on my GMC-pewter color (silver), And my quesiton is regarding which product to use with which pad to eliminate or decrease the imperfections.



here is my pads I have:

-Orange Cutting

-White Polishing

-Black Finishing



Here are the products I have:

-PB SSR1

-PB SSR2.5

-Klasse AIO

[dmxsoulja3]

2.5 and white, if that doesn`t cut it, 2.5 and orange, then 1 and white.

[imported_arenner80]

OK, Thanks! I will use the 2.5 w/ white, If that doesnt do the trick I will use 2.5 w/ orange. Then finish it down either way with white and the 1.



Should I apply the AIO with the white too??? Then just use the finishing pad for the EX?

[dmxsoulja3]

yup looks good to me, although I find ssr finishs down really nice so you may not even need the AIO, I usually polish etc, use my foam gun to wash down the car to get all the dust off and go with my wax/lsp of choice, some say waste time washing but hey I don`t like dust and taping up my car would take longer than waxing it and foam gun is fun anways

[imported_arenner80]

The AIO is non-abrasive, right? If so, is there really a need for me to use a white pad, or should I just use a finishing pad?

[dmxsoulja3]

they say its non abrasive but i`ve heard some say it has a tiny cut to it, but even so white or finishing at that point after you`ve used 2.5 and 1 isn`t going to matter.