so this morning i decided to do a full detail to the Infiniti QX4. well i properly used 3M blue masking tape on all plastic trims and vents. ran about because there was about 2 ft left lol... so i dug up some other masking tape. its white and it was a pain in the arse to peel off the roll (since it was so thin... it started ripping).. today was warm and its pretty sunny (82 degrees). after polishing i started to notice that the white masking tape started sticking and melting onto the plastic. i tried peeling it off but all the plastic areas that was taped by the white tape had sticky glue like residue on it! but the 3m blue maksing tape left zero residue... so im done with everything but i still have the masking tape on... so any ideas guys?