will Z2 pro Bond to #80?

**imported_thunder** · 03-06-2005, 11:01 PM

Just wondering if Zaino can be applied over #80. Also has anyone good a good combo for Silver? I have a buddy that just got a 98 Corvette and it`s Silver....... Thanks for the Info:xyxthumbs

**colche** · 03-07-2005, 12:04 AM

to my knowledge I`ve always heard #80 contains oils that will effect bonding, so it would probably effect durability.

I always follow up #80 with AIO to be safer.

**salty** · 03-07-2005, 01:47 AM

p21s is good on silver

**dogma** · 03-07-2005, 02:44 AM

I just did that combo with no issues. Either wash car after or spray down with Z6.

**imported_dpeezy415** · 03-07-2005, 02:58 AM

VM + EX-P on silver is a popular combo

**wannafbody** · 03-07-2005, 12:04 PM

IMO NO

**imported_memnuts** · 03-07-2005, 12:44 PM

Meg #80 followed by AIO or Z6 wipe down will work.

A wash following this procedure is of course the best. Use Dawn or Z7 followed by a Z6 wipe down. This will definitely remove the small amount of oils deposited during the #80 polishing session. Do the wash and Z6 and you will achieve normal durability longevity.

**imported_hadboosttroy** · 03-07-2005, 01:08 PM

Isn`t the purpose of 80 the oils though? I think you would be better suited using something like menzerna that is water based, or I believe any of the sonus polishes.

**imported_memnuts** · 03-07-2005, 05:34 PM

Meg #80 does have some paint cleansing properties via mild abrasives. Yes, Menzerna IP or FP would work with less after-polishing necessary prep as outlined above.

**Jesstzn** · 03-07-2005, 11:22 PM

If you did most of the work with #80 and finished up with Menzerna FP do you think that would be good enough to go right to Z2? Would FP clean upthe oils? I like the FP for the burnishing.