Meguiars glass cleaner concentrate and #40 questions

[gbackus]

What`s the proper way to use the glass cleaner concentrate? Using a terry towel, or a microfiber? I`ve got some stubborn streaks that just won`t come off, and figure a concentrated formula may be just what I need.



Also, what is the proper way to apply #40? Do you need to spay it on, and then buff it out, or how do I use it? Also, I`ve got some residue left from my last interior protectant, and it`s quite shiney, how would I remove this before applying #40?



Thanks.

[Mike_Phillips]

Use the Glass Cleaner at it`s recommended dilution level togehter with a microfiber polishing cloth. If this doesn`t remove streaks, then there is an underlying problem.



The best way to apply #40 depends on the condition of the surface to be treated. #40 has a mild chemical cleaner it in to first help clean the surface of dirt and grime. If the surface being treated is extra dirty, then first pre-clean with #39 Vinyl Cleaner.



If it`s not to dirty/grimy, then apply the #40 using a piece of terry cloth towel. While applying, aggitate the surface using the #40 as a cleaner/Conditioner. Wipe off.



If your towel shows dirt where you wiped it off, repeat.



The cleaner in #40 together with some aggitation from a piece of terry cloth should be enough to remove what ever you put on the surface the last time.



Mike

[gbackus]

I`ve had the streaking problem for quite awhile, poorboy`s spray and wipe couldn`t even remove it. What could it be?