1st time ZFX/Z5 - review and questions

[riotejas]

I notice that ppl are saying to use a nickel/dime size drop per panel (and more for the larger sections like the hood). Just wondering what the technique is. Are you putting an entire nickel size blob of Z5 on the foam application all at once and start applying it? If that`s the case, don`t you get a lot of Z5 where you begin the panel?

[TortoiseAWD]

<blockquote class=`ipsBlockquote` >

<em class=`bbc`>Originally posted by tmchow [/i]
<strong class=`bbc`>I notice that ppl are saying to use a nickel/dime size drop per panel (and more for the larger sections like the hood). Just wondering what the technique is. Are you putting an entire nickel size blob of Z5 on the foam application all at once and start applying it? If that`s the case, don`t you get a lot of Z5 where you begin the panel? [/b]</blockquote>tmchow,

I "scrub" the product around the face of the applicator . . . probably about a dime size if all in one blob (I get 2-3 layers from one ounce). Then, I dab the applicator around the panel to prevent the problem that you mentioned (too much Z in one spot). Finally, I spread completely with back-and-forth motions to get a thin, even layer.

See the attached pic for examples . . .

Tort