Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25
  1. #16

    Join Date
    May 2002
    Location
    Wisconsin
    Posts
    64
    Post Thanks / Like

    Re: Gyeon Q2 CanCoat

    Chicago Auto Pros did a Winter test of 26 different products through a real world 6 month durability test. Gyeon Can Coat did very well as did Adams Graphene Coating Spray but the best performing product so far is Gyeon Mohs Q2.


    https://youtu.be/BqyJxUahQkk

    Shocking FINAL Results After Testing 26 Different Protection Products On My Car - YouTube

  2. #17
    roscopervis's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, Wales.
    Posts
    58
    Post Thanks / Like

    Re: Gyeon Q2 CanCoat

    MOHs is a high solids coating whereas CanCoat is a much easier to use lower solids coating. It would make sense.

    I would also agree that many people who have a coating and think it’s failed, in the vast majority of cases it hasn’t. It will just be clogged up from contamination. It is also important to remember that contamination isn’t just fallout and that a hit of fallout remover won’t remove the tar, the hard water deposits or any of the other contamination that will have stuck.

    Cancoat will last through winter in almost all circumstances.
    Mae gan un o fy nghar ddau silindr a gyriant pedair olwyn. Mae gan y llall yr injan yn y canol. Dwi ddim yn hoffi rheolaidd.

  3. #18

    Join Date
    Nov 2018
    Posts
    1,727
    Post Thanks / Like

    Gyeon Q2 CanCoat

    Just decon washed my moms Rav4 waring One coat of Tacs Moonlight and 1 coat Adamís graphene spray.





    Not bad for 6 months. Similar results to CanCoat I used before.


    Sent from my iPhone using Tapatalk

  4. #19

    Join Date
    May 2002
    Location
    Wisconsin
    Posts
    64
    Post Thanks / Like

    Re: Gyeon Q2 CanCoat

    Thanks for the pics. What did you use for the decon wash?

  5. #20

    Join Date
    Feb 2020
    Posts
    185
    Post Thanks / Like

    Re: Gyeon Q2 CanCoat

    Quote Originally Posted by Coatings=crack View Post
    Just decon washed my moms Rav4 waring One coat of Tacs Moonlight and 1 coat Adam’s graphene spray.





    Not bad for 6 months. Similar results to CanCoat I used before.


    Sent from my iPhone using Tapatalk
    I`d been testing Moonlight against Cancoat last year and generally found Cancoat to maintain good performance for longer. Moonlight doesn`t quite have the initial crazy beading but with top ups it can do the 11 months it claims. It`s a bit slicker and nicer to apply to be fair.

  6. #21

    Join Date
    Nov 2018
    Posts
    1,727
    Post Thanks / Like

    Gyeon Q2 CanCoat

    Quote Originally Posted by atbalfour View Post
    I`d been testing Moonlight against Cancoat last year and generally found Cancoat to maintain good performance for longer. Moonlight doesn`t quite have the initial crazy beading but with top ups it can do the 11 months it claims. It`s a bit slicker and nicer to apply to be fair.
    Initially yes, the beading is way nice on Cancoat. After about 2-3,months though comparable. Cancoat got toppers and i got about 12 months

    At six months iíd say performance wise this combo could be slightly better. Not much. This car didnít need a decon.... just did it because i have a gallon if BF iron remover. I also just used Reset and not the Alkaline soap i normally use because i felt it didnít need it.

    The car i had CC on definitely needed it at 6 months. With it tho performance came back.

    If i were looking for out right self cleaning and protection iíd say this combo winning in light category. Iím also guessing this is mainly Moonlight performance as i applied Adamís GSC wrong. Applied and wiped almost instantly as it rainbows fast. Read on Adams shoulda let sit for minute or two.

    Overall my choice would be Cancoat as I feel itís molten glass appearance is one of my favorite from an LSP.

    Another factor though is Moonlight last longer in bottle. It was over 2 years old when i used it in April.

    CanCoat was jelly at 13 months


    Sent from my iPhone using Tapatalk

  7. #22

    Join Date
    Feb 2020
    Posts
    185
    Post Thanks / Like

    Re: Gyeon Q2 CanCoat

    Quote Originally Posted by Coatings=crack View Post
    Initially yes, the beading is way nice on Cancoat. After about 2-3,months though comparable. Cancoat got toppers and i got about 12 months

    At six months iíd say performance wise this combo could be slightly better. Not much. This car didnít need a decon.... just did it because i have a gallon if BF iron remover. I also just used Reset and not the Alkaline soap i normally use because i felt it didnít need it.

    The car i had CC on definitely needed it at 6 months. With it tho performance came back.

    If i were looking for out right self cleaning and protection iíd say this combo winning in light category. Iím also guessing this is mainly Moonlight performance as i applied Adamís GSC wrong. Applied and wiped almost instantly as it rainbows fast. Read on Adams shoulda let sit for minute or two.

    Overall my choice would be Cancoat as I feel itís molten glass appearance is one of my favorite from an LSP.

    Another factor though is Moonlight last longer in bottle. It was over 2 years old when i used it in April.

    CanCoat was jelly at 13 months


    Sent from my iPhone using Tapatalk
    Good to hear you`re getting performance from both. Moonlight with Cancoat on top is a really good combo to try, Budget inspired me with his Overcoat Cosmic duo. Looked just that bit more special (to me anyway).

    My bottle of moonlight actually gave up far quicker than the cancoat! Suspect that was my fault as some of the product had solidified at the cap so it may not have been fully air tight.

    When you apply 2 heavier coats of cancoat (lay it on thick and give it a bit of time before wipe off) it only adds to slickness and durability.


    Sent from my LYA-L09 using Tapatalk

  8. #23

    Join Date
    Jun 2019
    Posts
    229
    Post Thanks / Like

    Re: Gyeon Q2 CanCoat

    Thanks for the feedback coatings and atbalfour.

    i`m very happy with my coatings but it takes alot of effort in my situation outside. Cancoat is a better fit for me.

    I`ve since read that Adam`s graphene spray coating it also not water based? Like cancoat and moonlight? Looks like another option next year.

    3D as touch as well, never heard anything about yet. 3D is actually the more costly product.

  9. #24

    Join Date
    Nov 2018
    Posts
    1,727
    Post Thanks / Like

    Re: Gyeon Q2 CanCoat

    Whatís weird is my bottle is 2.5 years old. Looked it up. February 2019. Iíve heard the same 1 to 1.5 years.








    Weirder is i have some CqUk3 from around the same time. Little left in a open bottle and it seems to be good too.




    Sent from my iPhone using Tapatalk

  10. #25

    Join Date
    Oct 2017
    Location
    St. Louis Metro Area (Illinois)
    Posts
    842
    Post Thanks / Like

    Re: Gyeon Q2 CanCoat

    If you are going to top CanCoat, I`d recommend Gyeon Cure. Not only is it designed to work on Gyeon products and contains common ingredients, but when I used it on CanCoat, it preserved/kept the crazy beading/sheeting CanCoat delivers.
    Drop by to see the latest at The Car Geek Blog

 

 
Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Can you apply a wax on top of Gyeon Cancoat?
    By xilex in forum Car Detailing Product Discussion
    Replies: 10
    Last Post: 09-11-2018, 11:07 PM
  2. Gyeon CanCoat
    By BudgetPlan1 in forum Detailing Product Reviews
    Replies: 25
    Last Post: 06-22-2018, 09:19 AM
  3. Gyeon Q≤ ONE - First Impressions & Gyeon Booster Testing
    By Loach in forum Detailing Product Reviews
    Replies: 16
    Last Post: 04-09-2018, 08:00 PM
  4. Gyeon CanCoat 1 year write up.
    By Tc99m in forum Detailing Product Reviews
    Replies: 13
    Last Post: 01-19-2018, 11:10 PM
  5. Kamikaze Over Coat vs Gyeon CanCoat?
    By quebert in forum Car Detailing Product Discussion
    Replies: 21
    Last Post: 10-15-2016, 02:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •