B&S mf pads

[Coleroad]

What are the likes and dislikes about the B&S mf cutting and polishing pads (orange and black).

[mc2hill]

They work fine, but need a machine with a lot of power to get the best out of them - something like a Flex 3401. I have used them on a GG 6", but the thin `Megs type` pads work better on that machine, and on the long throws.

[Coleroad]

They work fine, but need a machine with a lot of power to get the best out of them - something like a Flex 3401. I have used them on a GG 6", but the thin `Megs type` pads work better on that machine, and on the long throws.

Was as your experience with the 5 or 6 inch backing plate and pad?

[Coatings=crack]

I have the buff and shine finishing MF (not uro fiber) and worked great with essence. The finished well and had decent cut as a combo. Light swirl removal.


Sent from my iPhone using Tapatalk

[Joel79]

They work fine, but need a machine with a lot of power to get the best out of them - something like a Flex 3401. I have used them on a GG 6", but the thin `Megs type` pads work better on that machine, and on the long throws.

They work great with rupes 15 and 21 but are so thick that you have to be carefull with the heat.

3401 is weaker in correction power and doesnt really like microfiber pads.

[Coatings=crack]

Also I used on Griots boss g15. Worked well


Sent from my iPhone using Tapatalk

[mc2hill]

Was as your experience with the 5 or 6 inch backing plate and pad?

The 5" backing plate.