Got it in today, it`s definitely easy to work with, spreads out nicely and flashes over quickly. Wipedown was great, this showed through in the gloss meter as well. Compared to Can Coat, it feels slightly slicker, slightly easier wipedown, slightly better gloss readings (this could even out after the first wash/rinse). I`m going to give both of these a week to cure before the first rinse test. These were applied after prepping with Meguiar`s D302 followed up with Prep-All, paint temp was 70F. I`ve also got the Adam`s applied over a tired M37 v2 section and on a section of Bead Maker boosted Blackfire Pro, applied in direct sunlight the temps were reading in the 100-120F range on the paint, seemed to work in just fine with no wipedown issues.
Had to stop a real strong desire to just keep going and coat over all the other test sections! Seems very user friendly, I`m reading a lot of guys are put off by the price, but if it`s coating level performance then it`s a no brainer choice especially for the mass amount of consumers who were duped by the Topcoat F11 advertising dumping $60 on that product. That is of course unless Mother`s CMX pulls off a miracle for $20.
Bookmarks