Page 1 of 2 12 LastLast
Results 1 to 15 of 20
  1. #1

    Join Date
    Aug 2012
    Location
    Tulsa, OK
    Posts
    70
    Post Thanks / Like

    New Pressure Washer for Xmas; Need Advice on Foam Cannons

    My wife bought me an AR 390 SS electric pressure washer for Christmas, and I`m looking for advice on foam cannons (and soap) compatible with it. I`ve done a bit of looking, but it appears most foam cannons want at least 1.8 GPM, and from what I can find out about this new pressure washer, it`s flow rate is 1.4 GPM. The pressure is more than enough at 2000...it`s just the flow rate that worries me. I`m also hoping that I don`t need any adaptors for the foam cannon, but I don`t see the specs for the AR`s fittings, so I`ve no idea on this.

    Any and all advice is welcome!

  2. #2

    Join Date
    Jul 2015
    Posts
    1,139
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    Quote Originally Posted by OzzieMike View Post
    My wife bought me an AR 390 SS electric pressure washer for Christmas, and I`m looking for advice on foam cannons (and soap) compatible with it. I`ve done a bit of looking, but it appears most foam cannons want at least 1.8 GPM, and from what I can find out about this new pressure washer, it`s flow rate is 1.4 GPM. The pressure is more than enough at 2000...it`s just the flow rate that worries me. I`m also hoping that I don`t need any adaptors for the foam cannon, but I don`t see the specs for the AR`s fittings, so I`ve no idea on this.

    Any and all advice is welcome!

    MTM Hydro Foam Canon of your choice:
    1) I know that there are some people on here that have experience with the *Chinese supplier* version of them and say that they can`t see any visible differences, but that`s up to you.
    2) You can find the MTM`s here, AG, or prime. It just depends on your desire for shipping.

    In order to take advantage of your pressure washer, you`ll need to source a 1.1mm orifice for the canon or buy the low volume version of the MTM. I just got my orifice a yesterday, haven`t had a chance to try it out, but I here that it is the bee`s knee`s.

    Hoses: 50 ft are forum favorites, doesn`t matter the supplier, as long as it has good reviews and is the same fittings as your PW.

    As far as soaps go, PB SSFoam is a good one, I personally use Purple Powers` Heavy Duty Vehicle and Boat PW Concentrate because it cleans very well (at the expense of LSP life) and is dirt cheap, BF`s Foam Booster does a good job of making foam foamier. BUT the biggest contributor of your foam will be your FC orifice and water quality.
    Likes OzzieMike liked this post

  3. #3
    Swanicyouth's Avatar
    Join Date
    Oct 2012
    Posts
    2,861
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    I have this pressure washer. It has standard pressure washer fittings - not proprietary like Karcher. I have the original MTM cannon & it works fine. I’m not really concerned about orifices & what not - cause it isn’t going to make any difference regarding the final result of how the car gets clean. I’ve been working on a gallon of Chemical Guys Honeydew for a few years. It’s the older version, but still works very well. Also use Bilt Hamber snow Foam from time to time.

    The benefit of foaming is dubious. I wouldn’t get too caught up in it
    Likes OzzieMike liked this post

  4. #4
    Mike The Guz's Avatar
    Join Date
    Oct 2013
    Location
    Lawndale, CA
    Posts
    3,757
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    You can get the MTM PF22. Seems to be the better canon. But AR sells the adapter needed for using their gun or the foam canon with the adapter already on it. You can technically use any soap with it.
    Competition Ready Team 1929 Bentley
    1999 Silvermist Metallic Pontiac Grand Prix GT
    2002 Arctic White Chevy Camaro SS
    Likes OzzieMike liked this post

  5. #5
    Swanicyouth's Avatar
    Join Date
    Oct 2012
    Posts
    2,861
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    Quote Originally Posted by The Guz View Post
    You can get the MTM PF22. Seems to be the better canon. But AR sells the adapter needed for using their gun or the foam canon with the adapter already on it. You can technically use any soap with it.
    This pressure washer uses standard fittings - no adapters required
    Likes OzzieMike liked this post

  6. #6
    Mike The Guz's Avatar
    Join Date
    Oct 2013
    Location
    Lawndale, CA
    Posts
    3,757
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    Quote Originally Posted by Swanicyouth View Post
    This pressure washer uses standard fittings - no adapters required
    Just going by what I saw on the AR site. If it doesn`t need it then even better.
    Competition Ready Team 1929 Bentley
    1999 Silvermist Metallic Pontiac Grand Prix GT
    2002 Arctic White Chevy Camaro SS
    Likes OzzieMike liked this post

  7. #7
    rlmccarty2000's Avatar
    Join Date
    Dec 2014
    Location
    Fitzgerald, GA, South East GA
    Posts
    4,498
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    I bought the foam cannon on the AR site and have been happy with it. Good quality, made in Italy.
    Likes OzzieMike liked this post

  8. #8

    Join Date
    Jul 2015
    Posts
    1,139
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    Quote Originally Posted by Swanicyouth View Post
    I have this pressure washer. It has standard pressure washer fittings - not proprietary like Karcher. I have the original MTM cannon & it works fine. (1)I’m not really concerned about orifices & what not - cause it isn’t going to make any difference regarding the final result of how the car gets clean. I’ve been working on a gallon of Chemical Guys Honeydew for a few years. It’s the older version, but still works very well. Also use Bilt Hamber snow Foam from time to time.

    (2)The benefit of foaming is dubious. I wouldn’t get too caught up in it



    1) Orifice size is more for the efficient use of foaming products, orifice restriction is to maximize foaming.
    2) Foaming is only handy on cars with visible dirt on the paint, otherwise a rinse will do.
    Likes OzzieMike liked this post

  9. #9
    Swanicyouth's Avatar
    Join Date
    Oct 2012
    Posts
    2,861
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    The funny thing about detailing is - it’s not a science - everyone has their own opinions. But, I have yet to see any proof that foaming (act of applying foam with a foam cannon) does anything to remove any dirt from a car whatsoever compared to just pressure washing with water.

    On the other hand, you can visibly see pressure washing (with plain water) remove a ton of dirt from a panel - compared to a conventional hose. In fact, I’m prepared to say - nobody can prove foaming does anything more substantial than just dumping soapy water on a panel.

    On the other hand, I will foam occasionally mainly cuz I hope it does *something*? But who knows? So, that’s why I was kinda suggesting the OP not get caught up too much in seeking the perfect foam cannon - since it’s benefits are questionable to begin with.
    Likes pwaug liked this post

  10. #10
    Mary B's Avatar
    Join Date
    Jan 2016
    Location
    Lakeville Mn.
    Posts
    1,508
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    Just happened to be looking at Cannons
    You have a nice machine, w/ a 1/4 " Quick connect at the tip of the wand.
    So you need a 1/4" male plug on the Cannon, like the one on the nozzles.
    No matter if it`s cheaper or top of the line, watch for the plug for your connection. Or get it and DIY.
    The PF22 top o the line. Full adjustments, spray width, Vert. or Horz. dial,
    -- or + marked soap mixing knob, upgraded bottle & tube.
    Have to say it... This CGs knockoff has an added widemouth bottle feature.
    (By the way I`m going with a cheapy for the time being)
    My PW is 1.2 GPM. so what I`ve learned from my research is to add more soap, like 3-4ozs.
    Good Luck and I hope this helps
    Likes OzzieMike liked this post

  11. #11

    Join Date
    Aug 2012
    Location
    Tulsa, OK
    Posts
    70
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    Many thanks for all the replies. Doesn`t seem I need an adaptor. I`ve ordered CG Honeydew and the MTM22 foam cannon.

    LOL....now just need warmer weather!
    Likes Jaddie liked this post

  12. #12
    Mary B's Avatar
    Join Date
    Jan 2016
    Location
    Lakeville Mn.
    Posts
    1,508
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    Quote Originally Posted by OzzieMike View Post
    Many thanks for all the replies. Doesn`t seem I need an adaptor. I`ve ordered CG Honeydew and the MTM22 foam cannon.

    LOL....now just need warmer weather!
    Nice choice !!
    Likes tom p. liked this post

  13. #13

    Join Date
    Jul 2015
    Posts
    1,139
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    Is that a new forum emoji???^

  14. #14
    Jaddie's Avatar
    Join Date
    Nov 2011
    Location
    Buford, GA, USA
    Posts
    523
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    I foam prior to every traditional wash. I think of it as a good step to do before prerinsing the vehicle. A good coat of foam followed by a good rinse should get all the loose dirt off.

    Sometimes I do this prior to a rinseless wash. I foam and rinse outside and then bring my van inside for the rinseless.
    —  Jaddie

    2012 Honda Odyssey EX-L Nav. (mine)
    2016 Ford Escape Titanium (hers)
    Thanks Mary B thanked for this post

  15. #15

    Join Date
    Jul 2015
    Posts
    1,139
    Post Thanks / Like

    Re: New Pressure Washer for Xmas; Need Advice on Foam Cannons

    MTM Hydro, Purple Power Heavy Duty Boat and RV PW Concentrate @ 2oz:15oz. LSP Stripping but it`s worth the cleaning power, car wasn`t washed for two weeks.

    New Pressure Washer for Xmas; Need Advice on Foam Cannons-foamproof.jpg
    Attached Images Attached Images
    Likes Mary B liked this post

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 1
    Last Post: 07-19-2010, 11:50 AM
  2. Help with pressure washer/foam gun!
    By 92Z28J in forum Car Detailing
    Replies: 2
    Last Post: 01-05-2010, 04:20 PM
  3. Dilution question for those using a Foam lance(pressure washer foam gun)
    By gbackus in forum Car Detailing Product Discussion
    Replies: 2
    Last Post: 06-27-2008, 03:13 PM
  4. Is there a FOAM gun available for MY pressure washer?
    By m4gician in forum Car Detailing
    Replies: 0
    Last Post: 08-20-2007, 09:24 PM
  5. Is there a foam gun for MY pressure washer?
    By m4gician in forum Canada
    Replies: 0
    Last Post: 08-20-2007, 07:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •