Page 28 of 28 FirstFirst ... 141516171819202122232425262728
Results 406 to 413 of 413
  1. #406
    BudgetPlan1's Avatar
    Join Date
    Apr 2010
    Location
    NE Ohio
    Posts
    1,819
    Post Thanks / Like

    Re: Think I`m done messing around with coatings, final thoughts...

    Heading off to Russiandl...provided he`s not actually *in* Russia...that would be some nutty shipping!

    Quote Originally Posted by Russiandl View Post
    PM sent


    Sent from my iPhone using Tapatalk
    Thanks Russiandl thanked for this post

  2. #407

    Join Date
    Nov 2018
    Posts
    277
    Post Thanks / Like

    Re: Think I`m done messing around with coatings, final thoughts...

    Not to get off hand but I have unused bottle of 50 ml cquk3. It’s kit with eraser and reload. Also have unused bottle of dr Beasley’s plasma coat with advanced coat gloss topper. Looking to trade for some 22ple or kamikaze (ism or miyabi). Have a mustang convertible and looking for enough to coat at least twice. Sorry for posting here but figured all the sio2 junkies visit this post. Please don’t reply in post. PM me.

    Thanks and sorry again,


    Sent from my iPhone using Tapatalk
    Likes BudgetPlan1 liked this post

  3. #408

    Join Date
    May 2003
    Posts
    228
    Post Thanks / Like

    Re: Think I`m done messing around with coatings, final thoughts...

    Since I will be coating my truck again soon, I had a question about doing the process outdoors -

    When I did it the first time, I was able to get everything done in a day. But with the plan to use 22PLE HPC, it wont be possible (need at least 24 hours set time, plus I want to do 2 coats).

    The issue is that my truck does not fit in my garage...its too tall. I do have a large tent (large enough to fit my truck in), that also has zip up side and end panels.

    Question is - could I coat it inside there, close the zip panels and leave it? Since Ill be doing it during warm (or hot) weather, would condensation be an issue inside with the truck there overnight?

    Or should I just beg/borrow/steal a garage that my truck can fit into?

    Thanks.

    -Chris

  4. #409
    BudgetPlan1's Avatar
    Join Date
    Apr 2010
    Location
    NE Ohio
    Posts
    1,819
    Post Thanks / Like

    Re: Think I`m done messing around with coatings, final thoughts...

    I`d definitely try to scare up a garage to do it in if at all possible, the morning condensation *might* cause some issues. I`ve never done it outside so can`t comment from actual experience but if doing 2 coats, it`s gonna prefer as much `dryness` as it can get. That`s one of the downers of 22ple stuff.

    The 24hr between coats is from 22ple themselves on one of the rare times I got thru to them via a Facebook message but the Detailed Image application instructions note 12hrs. I dunno, really...

    Application Instructions:
    Prior to coating, always prepare paint by polishing to perfection. Remove any polish residue with a thorough wash followed by an IPA wipe down to remove any remaining oily residue.
    Stir the content well prior to use
    Apply a few drops of HPC onto a 22ple Glass Coat Applicator and proceed to apply it onto the paint work in a straight line motion, taking care that the application covers all areas without leaving gaps.
    Allow approximately 3 minutes of dwell time (at 25 degrees C / 77 degrees F) or slightly longer in colder (below 20 degrees C / 68 degrees F) ambient temperature. Wait for the freshly coated surface to hazed up before removing the glass coat softly with the microfiber towel.
    It is highly recommended to cure the surface under infra-red curing lamp.
    If you choose to cure the glass coat under infra-red curing lamp, we recommend the following settings: Set temperature at 65 degrees C / 150 degrees F, cure for between 6 to 8 minutes from a distance of around 2 feet.
    7. Under ambient curing, allowed approx. 2 hours to settle, then finished off with spray of VS1 Final Coat to complete the application workflow.
    8. For infra-red curing, you may apply VS1 Final Coat once the surface has cooled down to ambient temperature. Do not apply VS1 Final Coat while the surface is still warm.


    Durability: 3 ~ 4 years
    Recommended: 2 ~ 3 layers, 12 hours apart
    Quote Originally Posted by chris03tl View Post
    Since I will be coating my truck again soon, I had a question about doing the process outdoors -

    When I did it the first time, I was able to get everything done in a day. But with the plan to use 22PLE HPC, it wont be possible (need at least 24 hours set time, plus I want to do 2 coats).

    The issue is that my truck does not fit in my garage...its too tall. I do have a large tent (large enough to fit my truck in), that also has zip up side and end panels.

    Question is - could I coat it inside there, close the zip panels and leave it? Since Ill be doing it during warm (or hot) weather, would condensation be an issue inside with the truck there overnight?

    Or should I just beg/borrow/steal a garage that my truck can fit into?

    Thanks.

    -Chris
    Thanks chris03tl thanked for this post

  5. #410

    Join Date
    May 2003
    Posts
    228
    Post Thanks / Like

    Re: Think I`m done messing around with coatings, final thoughts...

    Thanks....as much as I dont want to hear it I think thats the right way to go.

    I even had plans to raise the height of my garage opening, planned on doing it later this year but might need to move the plans up to make it sooner. Its actually not too hard from what I can see, other than needing all new garage doors ;(
    Likes BudgetPlan1 liked this post

  6. #411
    Oneheadlite's Avatar
    Join Date
    Sep 2016
    Location
    Andover, MN
    Posts
    414
    Post Thanks / Like

    Re: Think I`m done messing around with coatings, final thoughts...

    How far off is your truck from clearing? I`ve heard more than once of people dropping the tires down to 10psi to creep their truck in the garage, then pumping them back up once it`s in/out.
    Likes BudgetPlan1, Coatings=crack liked this post

  7. #412

    Join Date
    May 2003
    Posts
    228
    Post Thanks / Like

    Re: Think I`m done messing around with coatings, final thoughts...

    Quote Originally Posted by Oneheadlite View Post
    How far off is your truck from clearing? I`ve heard more than once of people dropping the tires down to 10psi to creep their truck in the garage, then pumping them back up once it`s in/out.
    Thought about that. Haven`t tested it but wasn`t sure if I would gain enough.

    I think the opening is 2-3" short but have not measured precisely yet. Not quite sure I could gain that much with less air in tires.

    Also don`t want to risk popping beads.

    Sent from my Nexus 6P using Tapatalk

  8. #413

    Join Date
    Nov 2018
    Posts
    277
    Post Thanks / Like

    Re: Think I`m done messing around with coatings, final thoughts...

    Check with were you bought the tires on if it’s ok to do. Inflate once in while working. Deflate again to take out


    Sent from my iPhone using Tapatalk

 

 
Page 28 of 28 FirstFirst ... 141516171819202122232425262728

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Final thoughts/good bye on McKee37 paint coating
    By donbeezy in forum Waxes, Sealants, and LSP's
    Replies: 29
    Last Post: 01-04-2017, 09:20 PM
  2. Anyone have thoughts on Kamikaze Coatings...
    By cobrar97 in forum Car Detailing Product Discussion
    Replies: 1
    Last Post: 02-16-2016, 07:01 AM
  3. Initial Thoughts: HD Express & 3D Final Touch
    By TroyScherer in forum 3D / High Definition Car Care
    Replies: 11
    Last Post: 05-24-2015, 05:07 PM
  4. Polish, wax, seal - final thoughts?
    By tCspool in forum Car Detailing Product Discussion
    Replies: 28
    Last Post: 09-11-2007, 04:32 PM
  5. Thoughts on Meguiars Final Inspection?
    By sellncars in forum Detailing Product Reviews
    Replies: 17
    Last Post: 03-23-2005, 06:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •